Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1975 Honda CB750F · Tools, hardware & accessories Buying guide
Start with the fitted wheel, rotor, clutch, carburetor or fork assembly. A shared CB750 model listing does not make the tools interchangeable: the retainer engagement, rotor thread and drive connection still need to match the job.
Rear wheel retainer ring toolRemoves the sprocket carrier bearing retainer ring on the 1975-78 F.Voir la pièce
Alternator rotor pullerM20 × 1.5 right-hand-thread puller for the listed internally threaded SOHC CB750 rotors.Voir la pièce
Carb float setting toolFixed float-setting gauge listed for the 1975–76 CB750F carburetors.Voir la pièce
Pièces connexes : SOHC engine rebuild stand · Clutch centre nut tool · Seat lock with keys
The front and rear ring tools use a 1/2-inch square drive; the separate rear bearing removal tool has a 22mm hex and a 3/8-inch square drive. The SOHC engine stand has pre-drilled base holes for bench mounting. Its description does not publish mounting-hole spacing or bolt specifications.
The float gauge is pre-set rather than adjustable, and its numerical setting is not published. The split fork-seal driver covers the stated 35/36mm applications. For fork-cap wrenches, measure the cap’s wrenching surface rather than using the fork-tube diameter as the wrench size.
The rear ring tool specifically lists the CB750F sprocket-carrier retainer. The separate removal tool names retainers replacing 41231-286-000 and 41231-429-000; the first of those is listed separately as the brake-disc-side retainer. Identify the retainer before deciding which tool the job needs.
No. The standard tool uses a 3/8-inch drive and has a 24mm inside diameter. The premium tool uses a 1/2-inch drive and has 20mm and 24mm ends. Those are tool dimensions, so also check engagement with the fitted nut.
No. The wrench is for the listed aftermarket spin-on filters, including 15-1006 for this application. It is not for the original bolt-retained Honda housing; identify the filter system before buying the tool.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.