VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB750F — Outils pour moteur, direction et embrayage

Workshop tools for the 1975 Honda CB750F engine, clutch and forks include a 20mm rotor puller, two clutch centre nut tools, a 35mm fork seal driver, fork cap wrenches, a tripod oil filter wrench and an engine rebuild stand made for SOHC motors.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD
35-0051
Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...
Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD
35-0076
Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...
Honda CB750 SOHC alternator rotor puller

1969-78 Honda CB750 SOHC Alternator Rotor Puller

$12.95 USD
35-0030
Pull your SOHC CB750 alternator rotor with this Alternator Rotor Puller, 20mm x M1.5 right-hand thread, for internal-thread rotors.Key Features• Alternator rotor puller• 20mm...
Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Épuisé
Honda CB750 engine rebuild stand for Honda CB750 SOHC

1969-78 Honda CB750 Engine Rebuild Stand ~ For Honda CB750 SOHC

$144.95 USD
73-1162
Streamline your engine rebuild with this high-quality CB750 SOHC Engine Rebuild Stand. Built to handle the weight and shape of the Honda CB750 SOHC...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Comparer

1975 Honda CB750F · Engine, steering & clutch tools Buying guide

Match the tool’s working connection

The rotor puller, clutch-nut tools, fork driver and filter wrench work on different interfaces. Check the fitted component and the tool’s connection before ordering, particularly where the engine, forks or oil-filter system have been changed.

Engine and clutch tools to consider

1969-78 Honda CB750 SOHC Alternator Rotor Puller Alternator rotor pullerM20 × 1.5 right-hand-thread puller for the listed internally threaded SOHC rotors.Voir la pièce Honda CB Clutch Center Nut Removal Tool Clutch centre nut toolClutch-nut tool with a 24mm inside diameter, used with a 3/8-inch driver.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver Fork seal driverSplit carbon-steel fork seal driver for the listed 35/36mm fork applications.Voir la pièce

Pièces connexes : Premium clutch centre nut tool · SOHC engine rebuild stand · Tripod oil filter wrench

Clutch tools and engine support

The standard clutch tool has a 24mm inside diameter and uses a 3/8-inch drive. The premium tool has 20mm and 24mm ends and uses a 1/2-inch drive. The SOHC stand has pre-drilled bench-mounting holes; mounting dimensions and bolt specifications are not published.

Fork-seal and filter applications

The split carbon-steel seal driver is listed for 35/36mm applications, including the 1975–78 CB750F. The 3/8-inch-drive tripod wrench is matched to aftermarket spin-on filter 15-1006 for this application, rather than the original bolt-retained filter housing.

Engine tool questions

Does a 35mm fork tube require a 35mm cap wrench?

Do not choose the wrench from fork-tube diameter alone. The 24mm wrench lists stock caps on the 1975–78 CB750F, while the 35mm wrench listing requires measuring the cap’s wrenching surface and shape. Confirm the cap actually fitted before choosing either.

Can I pry behind the rotor if it will not come off?

The puller listing says not to pry behind or hammer on the rotor. Follow the Honda removal procedure, remove the specified retaining hardware and use the correctly threaded puller fully engaged and square to the crankshaft.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB750F

Votre panier

×