Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1975 Honda CB750F · Fuel System Buying guide
A four-carburetor bike does not mean four of every product. Rebuild kits cover one carburetor each, while the holder set already supplies four holders. Check package contents before adding separate seals, valves or clamps.
Carb rebuild kitJapanese-made rebuild kit covering one carburetor, with #105 main and #40 pilot jets.Voir la pièce
Carb holder setFour carb holders for the 1975–76 CB750F. The band clamps are separate.Voir la pièce
Fuel petcockReplacement petcock with M20 × 1.5 thread, reference 16950-341-671; listed for the 1975–76 CB750F.Voir la pièce
Pièces connexes : Carb float with pin · Throttle pull cable · Stock-type air filter
The rebuild kit supplies a #105 main jet and a #40 pilot jet. The separate pilot-jet listing identifies #40 as the stock size for the 1975–76 CB750F. These are product and application references, not a guaranteed tune for changed carburetors, filters or exhausts.
One holder-set order supplies four holders. Band clamps are separate. Renewing clamps on both sides of all four holders requires eight of the listed 46–49mm clamps, part 15-0685; the clamp product is sold individually.
The kit includes the float needle and seat, but its contents do not include the float itself. The separate replacement float is sold individually with its pin. Four floats are fitted to the complete carburetor bank; replace only the ones required for the repair.
Yes. Each rebuild kit already includes a float bowl gasket and a float needle-and-seat set. The separate gasket and valve products are for individual repairs or another carburetor, so compare the repair list with the kit contents before adding them.
No. The set supplies four holders. The holder listing specifies eight separate 46–49mm band clamps to renew both ends of every holder, while the clamp listing supplies one clamp per order unit.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.