Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1979 Honda CB650 · Brake & Clutch Parts Buying guide
Choose the correct friction surface before moving on to hydraulics or hardware. The front caliper, rear drum and clutch each need their own inspection and model-specific replacement parts.
Kevlar front pad set52.4 × 52.5 × 11.2mm pads, supplied for one front caliper.View part
Standard rear brake shoesTwo rear drum-brake shoes; reference 06430-393-405.View part
Friction plate number oneSeparate number-one friction plate; seven pieces are specified per CB650.View part
Related parts: Friction plate number two · Steel clutch plate · Clutch spring kit
The front pad set is supplied for one caliper; rear shoes come as two shoes. Hydraulic parts are separate choices. If the front master cylinder has been changed, match repair kits and levers to that installed unit rather than the motorcycle year alone.
The CB650 applications specify seven number-one friction plates, one number-two friction plate and seven steel plates. The linked spring kit contains six springs. These are different packages, so use the service manual and inspected stack to establish the full order.
Identify the fitted caliper and compare the pad profile and dimensions with its verified specification. The original CB650 application cannot identify a caliper or front end installed by a previous owner.
No. The listed CB650 arrangement uses seven number-one plates and one number-two plate. Keep the two types separate when counting replacements and assembling the order.
Not automatically. A replacement assembly may use different internals and levers. Identify the fitted master cylinder first, then choose the repair kit expressly intended for that unit.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.