My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Battery, Fuse & Relay

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

New
Honda CB1100 CB1000 CB900 CB750 ATX14AHL battery

Honda CB1100/CB1000/CB900/CB750 ATX14AHL Battery

$79.95 USD
24-2204
Keep your vintage Honda starting strong with this ATX14AHL Replacement Battery, designed for reliable performance across a wide range of classic Honda models. This...

1981 Honda CB900C Custom · Sealed AGM Battery Buying guide

Check the battery fit and the reason it failed

The featured ATX14AHL is a sealed, pre-charged AGM battery. Confirm physical fit and cable polarity, then check the motorcycle’s charging and starting circuits so a replacement battery is not masking another fault.

Match the case and terminal arrangement

The listed specification is 12 V, 14 Ah and 210 CCA, measuring 5.28 in long × 3.54 in wide × 6.54 in high. Compare those dimensions with the actual tray and covers, especially on a modified motorcycle. Cables must reach the correct terminals without strain or contact with nearby metal.

Treat AGM as a sealed battery

Do not add acid or water to this supplied-sealed battery. Follow its charging instructions instead of applying the old flooded-battery topping-up procedure. Check the correct fuse rating for the year and circuit, and diagnose a repeated blown fuse rather than fitting a higher-rated one.

Practical questions

Why might a new battery still crank the engine slowly?

Check battery charge, cable and ground connections, and the starter circuit under load. Excessive resistance or a starter fault can remain after the battery is changed.

Does this battery need acid or distilled water before use?

No. The listed ATX14AHL arrives sealed and pre-charged. Keep it sealed and use the battery maker’s AGM charging procedure if charging is needed.

Can the lithium-only regulator be used with this AGM battery?

The separately listed lithium regulator specifically excludes lead-acid and AGM batteries. Choose charging equipment compatible with the installed battery chemistry and verify the motorcycle’s charging output.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×