VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB350F0 Supersport — pièces de moto

The CB350F0’s original swingarm pivot uses distinct thrust bushings, end caps and felts. Honda’s parts list identifies those pieces separately, so inspect the exposed pivot components before choosing replacements and keep the original arrangement clear during the rebuild.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Épuisé
Honda CB750 CB650 performance kibblewhite bronze swingarm bushing set 52108-457-300

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300

$69.95 USD
28-1038
Upgrade your swingarm bushings with this Kibblewhite High Performance Bronze Swingarm Bushing Set of 2, replacing OEM #52108-457-300 / #52108-422-300. Made in the USA...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Comparer

1972 Honda CB350F0 · Swingarm Pivot Parts Buying guide

Keep the pivot’s thrust and sealing pieces distinct

The featured bronze thrust bushings, metal caps and felts correspond to separate Honda-listed CB350F pivot parts. Each comes as a pair, but they perform different functions and should be checked individually for the repair.

Parts to consider

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300 Bronze thrust bushing pairTwo bronze thrust bushings, replacing reference 52109-283-300.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010 Metal swingarm cap pairTwo metal caps for the pivot ends, replacing reference 52144-283-010.Voir la pièce Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000 Swingarm felt pairTwo felts, for left and right pivot positions; replacement reference 52145-283-000.Voir la pièce

Pièces connexes : Swingarm grease fittings, pack of two

Use the original parts arrangement to guide the order

Honda lists two thrust bushings, two metal caps and two felts for this pivot arrangement. The featured packages supply two of each respective part. Check the old pieces and their positions before ordering, especially when an earlier repair may have mixed pivot components.

Grease fittings have a different package count

The related grease-fitting product contains two fittings, while Honda’s CB350F parts list specifies one fitting for the motorcycle. One package therefore exceeds that original fitting requirement. Inspect the fitted pivot and its lubrication point before deciding what needs replacement.

Buying questions

Are the bronze thrust bushings the same as the pivot sleeves?

They are distinct parts. The featured pair replaces thrust-bushing reference 52109-283-300. Identify the worn component in the CB350F parts arrangement before ordering rather than treating every swingarm bushing listing as interchangeable.

Should I buy both styles of dust cap in the grid?

Match the assembly fitted to your motorcycle. The original CB350F parts list identifies metal cap 52144-283-010 with separate felts. Choose the verified arrangement rather than combining differently referenced cap systems simply because both appear in the category.

How many grease-fitting packs are needed for the original pivot?

Honda lists one fitting, and the related product contains two. A single pack supplies more than that original requirement. Check whether your existing fitting actually needs replacement before adding it to the pivot-parts order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB350F0

Votre panier

×