Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1972 Honda CB350F0 · Starter & Charging Buying guide
Honda’s original CB350F uses a separate regulator and rectifier. A combined replacement changes that arrangement, while the stator, alternator harness and starter solenoid remain distinct components with different repair roles.
Starter solenoid relayListed for the 1972 CB350F; replacement references include Honda’s 35850-306-670.Voir la pièce
CB350F stock-style statorReplacement stator for the CB350F four, using reference 31102-333-004.Voir la pièce
Regulator/rectifier conversionCombined unit with stock-type plugs and instructions; 80mm mounting-hole spacing.Voir la pièce
Pièces connexes : Stator and field-coil harness · Lithium-specific regulator/rectifier · Starter terminal rubber boot
The featured regulator/rectifier replaces the original separate devices. Its stated dimensions are 68 × 94 × 26mm, with 80mm mounting-hole centers. Review the supplied instructions, the present connectors and a suitable mounting location before purchasing; a factory-position bolt-on fit is not promised.
The linked lithium-specific unit has a stated 14V ±0.2 set point and must not be used with standard lead-acid batteries. Check that figure against the battery manufacturer’s requirements. A charging conversion also needs sound wiring and connections; a new regulator does not repair a damaged harness.
The stator and the stator/field-coil wiring harness are separate products. Inspect the windings and wiring independently, then order the assemblies needed rather than assuming a stator purchase includes the separate replacement harness.
No. Its description specifically excludes standard lead-acid batteries. It is designed around a 14V ±0.2 set point for compatible lithium batteries, which must also match the battery manufacturer’s charging requirements.
No. The listed seals measure 60 × 1.4mm and 24.4 × 3.1mm and use different reference numbers. Identify the seal location and compare the removed part before choosing either size.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.