VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB350F0 Supersport — pièces de moto

When a CB350F0 carburetor needs a float or damaged screw replaced, a full rebuild kit may be unnecessary. Compare the float with pin, individual bowl drain screw and detailed screw assortment, then count the pieces needed across the four-carburetor bank.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...
Honda CB750 CB550 CB400 CB350 Keihin pd carburetor felt throttle shaft seal set 6

Honda CB750 / CB550 / CB400 / CB350 Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$21.95 USD
33-0045
Replace worn or missing felt throttle shaft seals during carburetor service on compatible vintage Honda CB models with Keihin PD carburetors. These felt seals...
Nouveau
Honda CB400F CB350F carburetor screw kit

1972-77 Honda CB400F / CB350F Carburetor Screw Kit

$17.57 USD
49-0775
Refresh your CB350F or CB400F Supersport carb screws with this Carburetor Screw Kit. Get a new set of screws to clean up the look...
Honda CB350F carb bolt kit

1972-74 Honda CB350F Carb Bolt Kit

$23.95 USD
73-1046
Restore your carburetor hardware with this Carburetor Bolt and Washer 40-Piece Kit, a complete bolt kit for all 4 carburetors.Key Features• Carburetor bolt and...
Honda CB400F CB350F carb float 16013-333-004

1972-77 Honda CB400F / CB350F Carb Float ~ Replaces 16013-333-004

$27.95 USD
20-6513
Replace your CB350F or CB400F Supersport carb float with this Carb Float with Pin, replacing OEM #16013-333-004.4 carb floats are used per bike, order...
Comparer

1972 Honda CB350F0 · Carb Floats & Hardware Buying guide

Order small carburetor parts by the fault and position

A replacement float, a drain screw and a bank-wide hardware kit solve different problems. Make a position-by-position list before dismantled parts from four similar carburetors become mixed together.

Parts to consider

1972-77 Honda CB400F / CB350F Carb Float ~ Replaces 16013-333-004 Carburetor float with pinReplacement float with pin, reference 16013-333-004. Four floats are used across the carburetor bank.Voir la pièce 1972-77 Honda CB400F / CB350F Carburetor Screw Kit Carburetor screw kitFour drain screws with O-rings, sixteen 4 × 12 screws, eight 5 × 16 screws and two 6 × 14 screws with lock washers.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Float-bowl drain screwOne stock-type drain screw with its O-ring, suitable for an individual bowl repair.Voir la pièce

Pièces connexes : Individual air-screw O-ring · Forty-piece carb bolt and washer kit

Choose single replacements for a local repair

The float includes a pin and the engine uses four floats across its carburetor bank. The individual drain screw includes its O-ring. If only one position is damaged, these defined components help keep the repair specific rather than replacing every fastener or ordering unneeded internal kits.

Compare the two hardware assortments directly

The featured screw kit lists four drain screws with O-rings, sixteen 4 × 12 screws, eight 5 × 16 screws and two 6 × 14 screws with lock washers. The linked forty-piece kit is a bolt-and-washer assortment for four carburetors; do not assume identical contents from the larger total.

Carb Floats & Hardware questions

Does one float order include all four floats?

The float product supplies a float with its pin and states that four floats are used per motorcycle. Count the individual carburetors needing replacement and order the required quantity rather than treating one float as a bank set.

Should I add four drain screws to the screw kit?

The screw kit already includes four drain screws with O-rings. Separate drain screws are useful for individual replacements, but adding another four would duplicate those pieces unless you deliberately want spares.

Is the forty-piece bolt kit the same as the screw kit?

They are separate assortments. The screw kit gives a detailed list including four sealed drain screws; the forty-piece product is described as bolts and washers for all four carburetors. Choose from the stated contents rather than comparing totals alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB350F0

Votre panier

×