VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Plaquettes, mâchoires, durites et tiges de frein

Compare the caliper pads and hydraulic line sections on your 1972 CB450K before choosing replacements. Hose length matters alongside the stated endpoints and fittings. Treat rear shoe springs and rod connection hardware as separate service locations when deciding which pieces belong in the brake order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Plaquettes, mâchoires, durites et tiges de frein

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB700 CB650 rear friction shoe spring set 2 43151-346-000

Honda CB Rear Friction Shoe Spring Set/2 ~ Replaces 43151-346-000

$7.95 USD
73-0895
Replace your rear brake shoe springs with this Rear Brake Shoe Spring Set of 2, replacing OEM #43151-346-000.Key Features• Rear brake shoe spring set•...
Honda CB750 CB550 CB500 CB450 front friction pad set 45105-323-023

Honda CB Front Friction Pad Set ~ Replaces 45105-323-023

$32.95 USD
29-3501
Replace your front brake pads with this Brake Pad Set of 2 in Kevlar, 52 x 20mm + 52 x 12.8mm. Replaces OEM #45105-323-023...
Honda CB750 CB550 CB500 CB450 front stop hose in.a in. 45125-300-003

Honda CB Front Stop Hose "A" ~ Replaces 45125-300-003

$47.95 USD
51-7205
Replace your front brake hose "A" with this Front Brake Hose "A", connecting the 3-way joint to the front brake pipe. Replaces OEM #45125-300-003....
Honda CB750F CB750K CB450K front stop hose "b" 45126-341-003

1972-76 Honda CB750F / CB750K / CB450K Front Stop Hose "B" ~ Replaces 45126-341-003

$49.95 USD
51-7204
Replace your front brake hose "B" with this Front Brake Hose "B", connecting the front brake master cylinder to the 3-way joint. Replaces OEM...
Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB550 CB500 CB450 front brake pipe 45128-323-020

Honda CB Front Brake Pipe ~ Replaces 45128-323-020

$17.09 USD
07-9971
Replace the front brake pipe on a wide range of '70s Hondas with this Front Brake Pipe, replacing OEM #45128-323-020. Approximately 8" total length,...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Honda CB750 CB700 CB650 CB550 CB500 brake rod joint pin w cotter pin

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Honda CB750 CB550 CB500 CB450 brake hose rubber grommet 45146-300-000

Honda CB Brake Hose Rubber Grommet ~ Replaces 45146-300-000

$4.61 USD
73-0091
Replace your brake hose grommet with this Brake Hose Rubber Grommet, the rubber grommet that attaches to the brake hose, replacing OEM #45146-300-000.Key Features•...
Honda CB750K CB500T CB450K front stop hose guide 45129-300-000

1969-76 Honda CB750K / CB500T / CB450K Front Stop Hose Guide ~ Replaces 45129-300-000

$8.95 USD
73-0950
Replace your front brake hose guide with this Front Brake Hose Guide, replacing OEM #45129-300-000.Key Features• Front brake hose guide• Replaces OEM #45129-300-000• Honda...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Comparer

1972 Honda CB450K · Brake Pads, Shoes, Hose & Rod Buying guide

Match the pad pair and each hydraulic section separately

The front pad package contains two pieces with 52 × 20mm and 52 × 12.8mm size groups. Hose A runs from joint to pipe; hose B runs from master to joint. The separate pipe and rear spring set carry different references and contents.

Parts to consider

Honda CB Front Stop Hose "A" ~ Replaces 45125-300-003 13.75-inch joint-to-pipe hose AHose referencing Honda 45125-300-003. Its stated section connects the three-way joint to the front brake pipe. Check that section’s actual connections and routed length; hose name alone does not identify a changed installation.Voir la pièce 1972-76 Honda CB750F / CB750K / CB450K Front Stop Hose "B" ~ Replaces 45126-341-003 15.5-inch master-to-joint hose BHose referencing Honda 45126-341-003 and explicitly listed for the 1972 CB450K. Connects the front master cylinder to the three-way joint. Compare the ends and route against the assembly being retained.Voir la pièce Honda CB Front Friction Pad Set ~ Replaces 45105-323-023 Two-piece Kevlar front pad setSet of two pads with the stated dimension groups 52 × 20mm and 52 × 12.8mm. Listed for the 1972 CB450K, with references including 45105-323-023 / 45106-323-013. Compare both pads and the retained caliper before ordering.Voir la pièce

Pièces connexes : Eight-inch pipe and fitting comparison · Rear shoe spring set of two · Joint pin and included cotter pin

Compare routing supports independently of the line purchase

The hose guide references 45129-300-000; the hose grommet references 45146-300-000 and attaches to the hose. Neither is named as supplied with these hose descriptions. Inspect the retained supports and actual route before deciding whether the line repair needs those separate components.

Separate spring and linkage repairs at the rear

The rear shoe package expressly supplies two springs under reference 43151-346-000. The joint pin has its cotter pin, while the joint and adjusting hardware have separate listings. Identify the rear component needing renewal rather than treating all rod and spring products as one hardware set.

Pad, line and rear hardware buying questions

What should I compare when only one pad’s size seems familiar?

Check both stated groups, 52 × 20mm and 52 × 12.8mm, against the actual pads and caliper. The package is a two-piece set. Confirm any additional shape or locating detail needed by a changed caliper rather than using only one dimension to select it.

How long are hose A, hose B and the separate brake pipe?

Hose A is 13.75 inches from the three-way joint to the brake pipe. The selected hose B is 15.5 inches from the master to the joint. The pipe is approximately eight inches overall; compare each section’s route and fittings.

What is explicitly supplied with the rear joint pin?

The listing names joint pin 95015-52000 and cotter pin 94201-16250. It does not name the rod-to-arm joint as included. Compare that separate joint and the adjusting hardware if those locations also need repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×