VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1976 Honda CB550F Supersport — Outils pour moteur, direction et embrayage

Select fork and filter tools for your 1976 Honda CB550F by the fitting each one engages. A 24 mm cap wrench, 35/36 mm seal driver and spin-on cartridge wrench handle separate tasks. Identify the actual fork caps and filter system before buying.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Comparer

1976 Honda CB550F · Fork & Filter Tools Buying guide

Choose each tool by its working fitting

Tube diameter, cap-hex size and filter type are different checks. Compare each assembly on the motorcycle before selecting the corresponding driver or wrench, especially when earlier owners changed forks, caps or the oil-filter arrangement.

Parts to consider

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24 mm non-marring fork-cap wrenchFor a 24 mm fork-cap hex; listed for original CB550F applications.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver 35/36 mm split fork-seal driverSplit-design tool for installing seals on the specified fork sizes.Voir la pièce Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Three-eighths-drive spin-on filter wrenchTripod wrench for the listed aftermarket spin-on cartridge filter; not a paper-element housing tool.Voir la pièce

Keep fork measurements distinct

The cap wrench’s 24 mm measurement describes the hex it turns; the seal driver’s 35/36 mm range relates to the fork size. These numbers are not alternatives for the same fitting. Check the installed cap and tube separately, then use the correct service instructions for the fork assembly being opened.

Check the filter arrangement before buying its wrench

The tripod wrench is specified for the aftermarket spin-on cartridge filter and has a three-eighths drive. It does not service the original paper-filter housing bolt. Confirm a compatible conversion cartridge is fitted before buying it, so the tool connection matches the filter arrangement actually on the engine.

Common buying questions

Will a 35 mm fork size identify the cap-wrench size?

No. Tube diameter and cap hex are different measurements. The listed stock-application cap wrench is 24 mm, but changed caps must be measured directly. Compare the actual working fitting before choosing a wrench.

Can the split driver be selected after a fork conversion?

Check the replacement fork’s diameter and tool engagement against the stated 35/36 mm range. The driver is described for conventional or inverted forks within its application; the motorcycle’s original model name alone does not establish conversion fit.

Does the tripod wrench work with the original paper filter?

It is intended for the specified aftermarket spin-on cartridge filter, not the original filter-housing bolt. Identify the installed filter system first and choose the equipment required for that arrangement’s normal service procedure.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1976 Honda CB550F Supersport

Votre panier

×