Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1976 Honda CB550F · Instrument Cables Buying guide
Use the cable being replaced as the connection reference, then measure its route. A moved instrument can change the required path even when a cable is listed for the original motorcycle application.
Tachometer cable, 29 inchesBlack replacement cable, listed at 29 inches and made in Japan; measure the installed route before ordering.Voir la pièce
Chrome tachometer cable clampSeparate retaining clamp for reference 50462-323-010, listed for the 1975–77 CB550F.Voir la pièce
Pièces connexes : Tach-drive block-off plug with O-ring
The black speedometer cable is 38.5 inches end to end and the black tachometer cable is listed at 29 inches; both are made in Japan. Compare each end connection and routing on the motorcycle. The separate chrome tachometer clamp addresses cable retention rather than the cable itself.
The linked tach-drive plug with O-ring closes the opening when the mechanical tachometer cable is removed. It is intended for a changed setup, rather than repairing a cable-driven instrument. Compare the drive connection and follow the conversion instructions before deciding to remove the mechanical cable.
The featured chrome tachometer cable clamp is a separate product. Inspect the old retaining hardware before ordering the cable, then choose the clamp separately if it needs renewal. Compare the cable ends and route as part of the same repair.
Compare both cable ends and measure the new routing path. The stated lengths are 38.5 inches for the speedometer cable and 29 inches for the tachometer cable. A changed gauge position may need another length even though the model application matches.
The plug is for closing the drive opening after the cable is removed, such as during a changed tachometer setup. For a retained mechanical instrument, choose the matching cable and retaining hardware instead, using the fitted connections as the reference.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.