Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1975 Honda CB550F · Pistons & Rings Buying guide
Standard-size parts are a purchase decision based on measurements, not the year badge. Check the cylinder and existing piston, then choose a ring-only repair or a kit for the individual piston being replaced.
Standard 58.5 mm piston kitSupplies one piston, rings, pin and a pair of clips; four kits cover all four cylinders.Voir la pièce
Japanese-made standard ring setReference 13011-374-000. Rings for one piston; four sets are needed for all four pistons.Voir la pièce
Genuine Honda piston pinSeparate piston pin with references 13111-440-000 and 13111-286-000; compare with your existing assembly.Voir la pièce
Pièces connexes : Alternative standard-size ring set
For a complete standard-size piston replacement, the kit contains the rings, pin and two clips for one piston. Ring-only orders are also per piston. Count the positions being repaired before ordering; replacing one worn assembly and rebuilding all four cylinders require different quantities.
An earlier rebore or replacement piston can make standard-size parts the wrong choice. Have the bore, piston and ring suitability checked against service limits before purchasing. The linked alternative ring set carries the same standard-size reference; it is not an oversize option for a machined cylinder.
Each listed standard ring set supplies one piston. Re-ringing all four pistons requires four sets, after confirming that the measured cylinders and existing pistons are suitable for this standard-size ring application.
Yes. Each standard 58.5 mm kit contains one piston, its rings, one piston pin and a pair of clips. Check your repair quantities before adding separate pins or clips to the same order.
Do not assume so. Measure the bore and identify the installed piston size first. Standard-size rings are not a substitute for the oversize parts a machined cylinder may require; use the measured specification to select parts.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.