VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB550F Supersport — Guidon et commandes

Refresh the handlebar fittings on your 1975 Honda CB550F with black clamps or stock-type closed-end grips. Match the 7/8-inch handlebar and existing controls, then check cable routing and switch wiring if the bar position or cockpit layout has changed.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips end detail 53165-342-670

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670

$17.95 USD
02-2423
Take your early-'70s Honda back to factory spec with these Honda OEM-Type Rubber Grips. Faithful replicas of the original factory grips, in black closed-end...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Honda CB550F handlebar stock type CB550F 1975-76 53100-390-620

1975-76 Honda CB550F Handlebar ~ Stock Type ~ CB550F 1975-76 ~ Replaces 53100-390-620

$64.95 USD
73-1097
Replace your CB550F handlebar with this Stock Type Handlebar for the CB550F (1975-76), Chrome. The holes are pre-cut for routing the wiring from the...
Comparer

1975 Honda CB550F · Handlebar fittings Buying guide

Match the clamp and grip details to your cockpit

Choose the handlebar fittings around the installed bar and controls. Clamp diameter, grip length and closed-end design matter, while changed handlebars can alter cable routing, switch position and the hardware needed for mounting.

Parts to consider

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black 7/8-inch handlebar clamp setStock-style black clamps listed for the CB550F. Clamp mounting hardware is supplied separately.Voir la pièce Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670 Stock-type closed-end rubber gripsBlack replica grips for 7/8-inch bars, 135 mm long. Replace references 53165-342-670 / 53166-342-670.Voir la pièce

Check the clamps before choosing a finish

The black clamp set is listed for the CB550F and 7/8-inch bars. Compare the lower mount and upper bridge with the arrangement on your motorcycle, especially if those parts were changed. The clamp mounting hardware is separate; inspect what you already have instead of assuming every fastener comes with the set.

Keep the controls and routing in mind

The featured rubber grips have closed ends and a stated length of 135 mm. Compare them with the throttle sleeve and any bar-end accessories. If the handlebars have changed, also check switch wiring, cable routes and steering movement before finishing the cockpit; grip appearance alone does not confirm the complete control setup.

Handlebar Fittings & Grips FAQs

Are the grips genuine Honda parts?

They are stock-type replicas in black rubber, with closed ends and a 135 mm length. Their replacement references are 53165-342-670 / 53166-342-670. Choose them for the stated application and original-style appearance, rather than assuming they are Honda-branded genuine parts.

Do the black clamps include mounting hardware?

The clamp product identifies its hardware as a separate item. Check the existing mounting fasteners and their condition before ordering. The clamps are listed for 7/8-inch handlebars, but a changed upper bridge still needs its mounting arrangement compared.

What should I check if I have bar-end mirrors?

The featured grips have closed ends. Compare your mirror’s mounting method, required bar-end opening and available clearance before choosing them. Also check the throttle sleeve so the completed arrangement can move correctly without contact at the bar end.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB550F Supersport

Votre panier

×