Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1981 Honda CB650 · Fuel-System Parts Buying guide
This year has its own carburetor applications. Check kit coverage per carburetor and the separate holder-clamp requirements before taking the bank apart or ordering several related service items.
CV carburetor rebuild kitJapanese-made kit for one 1981–82 CB650 CV carburetor; includes jets, seals and mixture-screw parts.Voir la pièce
Four carburetor holdersSet of four engine-side holders; the specified eight clamps are separate.Voir la pièce
M18 fuel petcockM18 × 1.0 thread; listed specifically for the 1981 CB650 application.Voir la pièce
The featured CV kit contains a float-bowl gasket, O-rings, float needle, primary and secondary main jets, pilot jet, mixture screw and spring. Each kit rebuilds one carburetor. Check the separate deluxe kit if the needle jet and jet needle also need replacement.
The holder set supplies four rubbers and specifies eight separate clamps. At the tank, the 1981 petcock uses M18 × 1.0 threads. Confirm both the fitted carb bank and tank, since changed assemblies can invalidate a year-based selection.
Compare the fitted carburetor identification, existing metering parts and Honda specification before installing the supplied jets. A kit’s model application and package contents do not establish the right calibration for a modified intake or exhaust.
The holder package is a set of four. Its instructions specify eight separate 50–52 mm band clamps or the named gear-clamp alternative, so inspect the existing clamps before ordering.
Measure its petcock connection and check clearance rather than relying on the frame year. The selected petcock specifies M18 × 1.0 threads for the listed 1981 application.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.