Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1982 Honda CB900C Custom · Suspension & Wheel Parts Buying guide
The original 1982 CB900C has air-assisted forks, linked rear air shocks and shaft final drive. The listed 325 mm replacement shocks use coil springs and preload adjustment. Identify the fitted assembly before ordering fork seals, shocks or wheel parts.
Fork oil-seal setJapanese-made fork seal set sized 37 × 50 × 11 mm, with an explicit CB900C Custom application.Voir la pièce
Black 325 mm shock set325 mm eye-to-eye shocks with four-position preload and progressive-wound springs; includes bushings, inserts, washers and a preload wrench.Voir la pièce
6302-2RS front wheel bearingJapanese-made front wheel bearing with two synthetic shields. Two bearings are used per front wheel.Voir la pièce
The 37 × 50 × 11 mm fork oil seals are separate from the dust seals and cap O-rings. The original air-assisted forks need the correct year’s service procedure: Honda revised fork data in the 1981 CB900C addendum. Shared replacement-seal dimensions do not mean every year uses the same refill instructions.
The featured 6302-2RS bearing is a front wheel part, with two required at that wheel. Front and rear wheel seals are separate products with different package counts. Identify the axle and damaged component before choosing bearings, seals or retaining hardware for the repair.
The featured 325 mm sets specify four-position spring preload adjustment. Honda’s original shocks use a linked air system, so its rear-air pressure instructions do not describe these aftermarket sets. Follow the replacement maker’s fitting and adjustment instructions.
Locate the leak first. The CB900C has a separate shaft final-drive assembly, while the listed wheel seals serve the wheel hub positions. A front seal kit or single rear-wheel seal is not a complete final-drive seal kit.
Two 6302-2RS bearings are used per front wheel. Review the product quantity and the number being replaced; the two synthetic shields describe each bearing’s construction, not a package containing two bearings.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.