VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB1000C — Plaquettes, mâchoires, durites et tiges de frein

Pad choice on the 1983 Honda CB1000C depends on which disc you are servicing. The front calipers take a 9mm-thick pad and the rear takes a 10.5mm pad, each offered in Kevlar or sintered metal. A brake rod pin rounds out the group.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Plaquettes, mâchoires, durites et tiges de frein

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 front friction pad set 45105-KN8-026

Honda CB Front Friction Pad Set ~ Replaces 45105-KN8-026

$29.95 USD
29-3532
Replace your DOHC CB front brake pads with this Brake Pad Set in Kevlar, 90 x 49 x 9mm, replacing OEM #45105-KN8-026. Set fits...
Honda CB1100 CB1000 CB900 front rear friction pad set 45105-MA3-007

Honda CB Front / Rear Friction Pad Set ~ Replaces 45105-MA3-007

$29.95 USD
29-3533
Replace your DOHC CB brake pads with this Front / Rear Brake Pad Set in Kevlar, 90 x 49 x 10.5mm, replacing OEM #45105-MA3-007.Key...
Honda CB1100 CB1000 CB900 CB750 brake rod pin 46503-371-000

Honda CB1100 / CB1000 / CB900 / CB750 Brake Rod Pin ~ Replaces 46503-371-000

$6.95 USD
29-7031
Replace your brake rod pin with this Brake Rod Pin, replacing OEM #46503-371-000.Key Features• Brake rod pin• Replaces OEM #46503-371-000• Honda part name: Pin,...
Honda CB1100 CB1000 front sintered metal friction pad set 45105-KN8-026

Honda CB Front Sintered Metal Friction Pad Set ~ Replaces 45105-KN8-026

$37.95 USD
29-3603
Upgrade your DOHC CB front brake pads to sintered metal with this Brake Pad Set, 90 x 49 x 9mm, replacing OEM #45105-KN8-026. Set...
Honda CB1100 CB1000 front rear sintered metal friction pad set 45105-MA3-007

Honda CB Front / Rear Sintered Metal Friction Pad Set ~ Replaces 45105-MA3-007

$39.95 USD
29-3703
Upgrade your DOHC CB brake pads to sintered metal with this Front / Rear Brake Pad Set, 90 x 49 x 10.5mm, replacing OEM...
Comparer

1983 Honda CB1000C · Brake Pads Buying guide

Identify the pad before choosing its compound

The listed front and rear pads share a 90 × 49mm outline but have different new-pad thicknesses. Use the caliper position and replacement reference to distinguish them; the thickness of a worn pad is not a reliable substitute for its original specification.

Pads to consider

Honda CB Front Friction Pad Set ~ Replaces 45105-KN8-026 Front Kevlar pads90 x 49 x 9mm Kevlar pads; each set fits one caliper.Voir la pièce Honda CB Front / Rear Friction Pad Set ~ Replaces 45105-MA3-007 Rear Kevlar pads90 x 49 x 10.5mm Kevlar pads, listed for the rear disc on this model.Voir la pièce Honda CB Front Sintered Metal Friction Pad Set ~ Replaces 45105-KN8-026 Front sintered metal padsA sintered metal alternative to the front Kevlar set.Voir la pièce

Pièces connexes : Rear sintered metal pads · Brake rod pin

Keep compound choice separate from fitment

Kevlar and sintered-metal versions are listed in both sizes. The listings establish their material and application but provide no comparative stopping-distance or rotor-wear test. Confirm suitability for the discs fitted, especially on a modified brake system, rather than assuming the more expensive compound is automatically better.

Inspect the rear linkage as well as the pads

Pin 29-7031 connects the rear brake linkage and replaces 46503-371-000. Its FAQ calls for checking the pin, mating clevis and retaining hardware together. A new pin will not remove play caused by a worn mating hole, and linkage work should include a pedal-return and brake-light check.

Pad questions

Can I identify the right pad by measuring a used one?

Use its shape and reference to help identify it, but do not choose the new-pad thickness from the worn friction material. The 9mm front and 10.5mm rear dimensions describe the listed replacement pads. Confirm the actual caliper and brake position before ordering.

Will different pads cure a dragging rear brake?

Do not assume so. Honda specifically warns that incorrect rear pedal-height adjustment can cause brake drag. Have the pedal adjustment, linkage return and hydraulic caliper operation checked before choosing pads; changing friction material does not correct those faults.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB1000C

Votre panier

×