Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1983 Honda CB1000C · Levers & Cable Buying guide
Inspect the lever bore, pivot bolt and perch together when the lever feels loose. For a heavy or inconsistent clutch pull, also check cable condition and routing. Replacing a bolt or cable without identifying the worn or binding part can leave the fault unchanged.
Clutch cableMade for the 1983 CB1000C Custom and listing no other model.Voir la pièce
Black clutch leverBlack lever for the CB1000C with an 8mm bolt hole.Voir la pièce
Clutch lever pivot bolt and nutThe listed clutch-pivot set has an 8mm bolt; compare its shoulder and the fitted perch as well as diameter.Voir la pièce
Pièces connexes : Brake lever pivot bolt and nut · Clutch adjuster bolt · Clutch lever switch
Honda specifies 10–20mm of clutch free play measured at the end of the CB1000C lever. The manual also limits exposed upper-adjuster thread to 8mm; if the lever adjustment cannot achieve the setting, follow the clutch-housing procedure instead of winding the upper adjuster farther out.
Brake lever 08-0024 lists the CB1000C, but its suggested 08-0023 clutch-lever pairing does not cover every model in that brake-lever listing. The selected CB1000C clutch lever is 08-0059. Match each control separately and verify free movement, full return and the correct switch operation after fitting.
Only if the bolt is the worn part. The pivot-set FAQs also require inspecting the lever bore and perch. Check the shoulder length, thread and perch width, especially with aftermarket controls, and do not tighten the fastener enough to bind the lever as a way of hiding wear.
No. Part 29-7033, reference 22841-425-000, is the clutch-lifter adjustment bolt. The separate 8 × 23mm cable adjuster works at the lever and does not explicitly list the CB1000C in its fitment block. Identify which adjustment point is damaged before ordering.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.