VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB700SC — Trousses de réfection, pistons et vis de purge d’étrier

Inspect the 1986 CB700SC front calipers before choosing seal kits or replacement pistons. The dual kit services both calipers; separate pistons measure 32 × 35 mm. Check bleed fittings and sealing surfaces so the order covers the damaged components without assuming every item must be renewed.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Trousses de réfection, pistons et vis de purge d’étrier

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 caliper bleed screw 43352-568-003

Honda CB Caliper Bleed Screw ~ Replaces 43352-568-003

$7.95 USD
73-0994
Replace your caliper bleed screw with this Brake Caliper Bleed Screw, replacing OEM #43352-568-003.Key Features• Brake caliper bleed screw• Replaces OEM #43352-568-003• Honda part...
Honda CB1100 CB1000 caliper bleed cap (pk 10) 45108-425-003

Honda CB Caliper Bleed Screw Rubber Cap (Pk/10) ~ Replaces 45108-425-003

$11.95 USD
29-0500
Stock up on caliper bleed screw rubber caps with this Brake Caliper Bleed Screw Rubber Cap 10-pack. Universal type for series 1, 3, 4,...
Honda CB700SC front caliper rebuild kit

1984-86 Honda CB700SC Front Caliper Rebuild Kit

$69.95 USD
29-0004
Rebuild both your CB700SC Nighthawk front calipers with this Front Caliper Dual Rebuild Kit (repairs two front calipers).Key Features• Front caliper dual rebuild kit•...
Honda CB700SC CB550SC front caliper piston 43107-MA7-006

1983-86 Honda CB700SC / CB550SC Front Caliper Piston ~ Replaces 43107-MA7-006

$37.95 USD
29-0510
Replace your CB700SC or CB550SC Nighthawk front caliper piston with this Front Brake Caliper Piston, 32mm diameter x 35mm length, replacing OEM #43107-MA7-006.Key Features•...
Comparer

1986 Honda CB700SC · Front Caliper Service Parts Buying guide

Choose caliper replacements from the inspection findings

The 1986 CB700SC has two pistons in each front caliper. One dual rebuild kit is listed for both calipers; the separate piston product supplies one piston. Inspect the hydraulic surfaces and the caliper mounting hardware before deciding how much of each assembly to renew.

Parts to consider

1984-86 Honda CB700SC Front Caliper Rebuild Kit Dual front-caliper rebuild kitOne kit repairs two CB700SC front calipers.Voir la pièce Honda CB Caliper Bleed Screw ~ Replaces 43352-568-003 Caliper or clutch-slave bleed screwOne bleed screw replacing 43352-568-003, listed for CB700SC front calipers and the clutch slave.Voir la pièce 1983-86 Honda CB700SC / CB550SC Front Caliper Piston ~ Replaces 43107-MA7-006 Front-caliper pistonOne 32 × 35 mm piston; four are used across the two original CB700SC front calipers.Voir la pièce

Separate seal-kit coverage from metal parts

The dual kit covers two calipers, but its product record does not enumerate every supplied seal or include a confirmed piston list. Honda calls for inspecting pistons and cylinders for scoring or other damage. New seals alone cannot be assumed to make damaged hydraulic surfaces serviceable.

Remember the TRAC-side mounting hardware

The original front brake works with Honda’s TRAC anti-dive fork mechanism. The caliper’s pivot and bracket hardware have jobs beyond holding fresh pads in place. Keep the left and right hardware identified and follow the CB700SC manual; the dual seal kit is not a stated rebuild kit for the fork’s TRAC mechanism.

Buying questions

Do I need one or four piston purchases?

The piston is sold individually. Four are needed only when replacing every piston across both original front calipers. Inspect each one and its bore before choosing a repair quantity.

Does a two-caliper kit also rebuild the TRAC anti-dive mechanism?

That coverage is not stated. The kit is listed for the brake calipers; Honda describes TRAC as a separate fork mechanism actuated by caliper reaction. Inspect its mounting and pivot hardware separately during front-end service.

Can the same bleed screw be used at the clutch slave?

The detailed listing includes both the CB700SC front calipers and clutch slave cylinder. Compare the installed thread and sealing seat if either assembly has been replaced; a shared bleed screw does not make their seal kits interchangeable.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB700SC

Votre panier

×