The 1981 Hawk combines a two-piston hydraulic front caliper, a rear drum brake and a cable-operated clutch. Identify the assembly being repaired before choosing pads, shoes or clutch plates, and check the fitted hardware if the motorcycle has been modified.
Drop in a factory-look master cylinder with a performance piston size using this Front Brake Master Cylinder Assembly. Black body with silver lever, custom-manufactured...
Rebuild your master cylinder reservoir with this Front Master Cylinder Reservoir Rebuild Kit, 2-screw cover type. Includes plastic reservoir, reservoir cap, diaphragm, O-ring, and...
Restore strong and consistent braking performance with this Front Brake Master Cylinder Assembly, designed as a high-quality replacement for many classic Honda models. This...
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Choose a blacked-out alternative to the chrome 07-9995 brake lever with this Black Brake Lever. Replaces OEM #53175-MA5-671 / #53175-MA6-016 with the same broad...
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Replace your front clutch lever safety stop switch with this Clutch Lever Stop Switch, replacing OEM #35330-413-003. This is the switch that allows the...
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Replace the diaphragm on your later DOHC CB's front master cylinder reservoir with this Front Master Cylinder Reservoir Diaphragm, replacing OEM #45520-MA5-671 / #45520-MA5-672...
Freshen up the brake caliper on compatible Honda CB models with this aftermarket deluxe brake caliper repair kit. This kit is intended for rebuilding...
Rebuild a single brake caliper with this Single Brake Caliper Rebuild Kit (repairs one caliper).Key Features• Single brake caliper rebuild kit• Repairs one caliperFitment...
Replace your rear brake stopper arm strap with this Joker Machine Brand Custom Rear Brake Stopper Arm Strap, replacing OEM #43431-286-010 / #43431-340-000.This strap...
Replace your DOHC caliper piston with this Brake Caliper Piston with Seals, 27mm diameter x 35mm length, replacing OEM #43107-MA3-006.Key Features• Brake caliper piston...
Rebuild your later-model CB's front master cylinder with this Front Master Cylinder Rebuild Kit, replacing OEM #45530-MA4-671. Fits the CB750K (1981-82), CB1000, CB900F (2002-07),...
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Replace your modern CB900F, CB350F, or CB400/CB450 clutch friction plate with this Clutch Friction Plate.Order the number of pieces required for your model.Key Features•...
Replace your CB400 or CB450 rear brake shoes with this Rear Brake Shoe Set of 2, replacing OEM #43120-413-006. Diameter 139mm, width 40mm.Key Features•...
Upgrade or restore your classic Honda motorcycle’s transmission with this Steel Clutch Plate — a precision‑made replacement designed to fit and replace OEM #23311‑413‑000....
Upgrade your CB400T or CB450T clutch springs with this High Performance Clutch Spring Kit of 4 springs. Made in Japan.Key Features• High-performance clutch spring...
Replace your CB400, CB450, CB350F/CB400F, or CB200 steel clutch plate B with this Steel Clutch Plate B, replacing OEM #22321-333-010.1 piece used per bike.Key...
Replace your CB350F, CB400F, or CB400/CB450 clutch friction plate with this Clutch Friction Plate, replacing OEM #22201-333-010 / #22201-ML4-610.Order the number of pieces required...
Replace a worn black clutch lever on your late-'70s or early-'80s Honda with this Clutch Lever, replacing OEM #53190-443-610 / #53178-399-700. Fits the CB400T...
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Match each repair to the Hawk’s brake and clutch layout
Front pads, rear shoes and clutch friction plates are separate service choices. The 1981 front brake matters here: use its specific caliper and master-cylinder application rather than assuming earlier Hawk brake parts carry over.
Use the fitted caliper and master cylinder to confirm the order, especially on bikes with swapped front ends. The front pad set covers one caliper. Choose internal master-cylinder, reservoir or caliper repair parts according to the component being serviced rather than buying by the broad brake category.
Count clutch parts by their position
The original clutch uses six main friction plates plus one different B-position friction plate. The corresponding steel plates also have separate A and B positions. Build a position-by-position order after checking wear, and use the Honda manual for stack arrangement and service limits.
Buying questions
Can I use earlier Hawk front-brake parts?
Do not assume interchange. The 1981 model has the two-piston front-caliper arrangement covered here. Identify the fitted caliper, master cylinder and lever before choosing parts, particularly on a bike assembled from several years.
Is one front pad set enough for the original front brake?
The featured set services one caliper, matching the original single-front-caliper arrangement. If the front end has been changed, confirm the caliper type and number before deciding on quantity.
Does one friction-plate purchase replace the clutch pack?
No. The main friction plates are individual pieces, and the B-position friction plate is a different item. Count the required types separately; steel plates and springs are also separate ordering decisions.
Not sure which part you need?
Send your model and year, plus photos of your existing part and any changes to the original setup.