My motorcycle Choose your Honda CB model

Search parts

Searching all Honda CB parts

Example: brake pads or oil filter.

Currently viewing Shock Absorbers

Honda motorcycle parts

Choose your model and year to see parts listed for your bike.

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...

Honda CB Shock Absorber Set ~ Stock Design ~ CB750K 1972-76

$179.95 USD
73-1055
Replace your shocks with this Stock Type Designed Shock Absorber Set, chrome body with chrome springs and chrome center. Modelled after the original stock...

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
New
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...

Honda CB Shock Absorber Set ~ Stock Design ~ CB750K 1969-71

$189.95 USD
73-0153
Restore your CB750 stance with this Stock Type Designed Shock Absorber Set. Chrome body with chrome springs and black center, modeled after the original...

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Sold out
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Sold out
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...

1982 Honda CB750SC · Rear Shocks & Mounts Buying guide

Measure the mounts before choosing a shock set

Finish is a secondary choice after length, eye-to-clevis mounting and hardware fit. The featured black and chrome sets share the stated 335mm measurement and four preload positions, with separate joint rubbers also available.

Compare length using the same reference points

The black and chrome sets are measured eye-to-clevis at 335mm. Use the same measurement points when comparing the fitted shocks. Do not infer original ride height merely from a product’s stock-length label, particularly on a motorcycle with altered mounts or suspension.

Review the supplied fitting pieces

Both featured sets list bushings, inserts, washers and a preload wrench. Check those contents against the motorcycle before adding separate mounting parts. The joint-rubber package contains two rubbers; mounting nuts and washers remain distinct choices when the existing pieces are worn or missing.

Rear Shocks & Mounts questions

What measurement do the featured sets use?

They measure 335mm from eye to clevis. Compare the same mounting points on the fitted shocks; an eye-to-eye measurement describes a different mounting arrangement and is not directly interchangeable.

What hardware comes with the 335mm sets?

The product contents list bushings, inserts, washers and a preload wrench. Compare the package with the actual mounts, and inspect the motorcycle’s existing nuts and other securing hardware separately.

Can I install the shorter shocks without other checks?

Do not assume so. Shorter custom shocks can alter suspension geometry and clearance. Have the complete setup assessed before choosing a different length or mounting style.

Not sure which part you need?

Send your model and year, plus photos of your existing part and any changes to the original setup.

Ask a fitment question

Your cart

×