Keep the original points ignition serviced or compare an electronic conversion for your 1977 CB750K. The selection includes ignition coils, contact points, condensers, spark plugs and switches. Confirm the system already fitted before choosing components that have different resistance requirements or package contents.
Replace your CB750 spark plugs with these NGK D8EA Spark Plugs, the standard original CB750 spark plug.4 required per CB750.Key Features• NGK D8EA spark...
Replace your SOHC CB750's points condenser with this Condenser, replacing OEM #30250-300-154 / #30250-300-005. Two required per CB750.Key Features• Condenser• Replaces OEM #30250-300-154 /...
Match with the left-side contact point using this Contact Point Set (1 piece, left-hand side) for cylinders 1 & 4. Replacing OEM #30203-300-005. Same...
Replace your points cover screws with this Points Cover Screws Set of 2.Key Features• Points cover screws• Set of 2Fitment / Compatibility• All 1969‑1978...
Restore a late-'70s or DOHC-era CB's ignition with this Ignition Switch with fork lock and keys, replacing OEM #35010-377-007 / #35100-377-003/007 / #35100-422-017 /...
Replace your CB750 ignition coils with this Stock Type Ignition Coil Set of 2 with brackets, replacing OEM #30500-300-013. Dual coil assembly pre-mounted on...
Rebuild your Honda ignition switch base with this Switch Repair Kit, including the base cover. Designed for use with our #12-0051 ignition switch (sold...
Replace your SOHC CB750 ignition coil with this Stock-Type Ignition Coil for contact point ignitions, replacing OEM #30501-300-003 / #30502-300-003 / #30502-300-013. 100mm center-to-center...
Restore your gauge cluster with this replacement Pilot Indicator Light Cover — a direct fit for OEM #37600‑377‑018. This part includes both the front...
Mount your ignition coils with a clean factory-style finish using this Ignition Coil Bracket Set, replacing OEM #30511-300-000. Features a polished high-grade finish and...
Fit a corrosion-resistant spark advance shaft with this Spark Advance Shaft with O-ring, replacing OEM #30231-300-010 / #91301-300-000. Nitrate-coated to guard against corrosion and...
Combine Dynatek's performance coils with matching plug wires in one package using this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2 with...
Replace just the base cover on your Honda ignition switch with this Switch Base Cover. Designed for our #12-0051 ignition switch (sold separately) with...
Replace the tower boots on your performance coils with this Coil Tower Boots 2-pack. Fits performance coils #17-6810, #07-9973, #07-9979, and #07-9980.Key Features• Coil...
Match your Dyna-style electronic ignition requirement with this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2. Same Dynatek quality as the 5...
Dress up your engine with this Joker Machine Brand Custom Black Finned Points Cover with a built-in rubber O-ring and gold-colored mounting hardware. Replaces...
Get the hottest, longest-lasting spark with this Ultimate High Output Coil. Designed for aftermarket electronic ignition systems only (not compatible with points). Dual-output coils...
Universal Motorcycle Spark Plug Cap ~ VB05F is an aftermarket part for the Honda CB applications listed in this product information. Before ordering, confirm...
Take the top-tier Dyna 2000 upgrade path on your SOHC CB750 or CB500/CB550 with this Dyna 2000 Digital Performance CDI Ignition Ultimate Kit. Includes...
Upgrade your CB750 or big-bore DOHC CB with this Performance Dual Output Ignition Coil, a 3.3 Ohm dual-tower type with hardware. Replaces stock factory...
Replace mechanical points and condensers with this aftermarket electronic ignition for the listed Honda SOHC four-cylinder models. Keep the original mechanical spark advancer and...
Step up to genuine Dynatek performance coils with this Dynatek Performance Dual-Output 5 Ohm Ignition Coil Set of 2. Produces spark voltages exceeding 30,000...
Step up your ignition with this Performance High Output 5.2 Ohm Dual-Output Ignition Coil. Primary resistance of 5.2 Ohm, secondary of 17K Ohm, designed...
Decide between servicing points and changing the ignition
Stock-type coil assemblies and individual contact points support the existing system. The Dyna S module is a separate electronic option, so its coil requirement and supplied components should be checked before planning a conversion.
The right contact point serves cylinders 2 and 3; the linked left point serves cylinders 1 and 4. Each listing supplies one piece. The linked condenser description states two are required per CB750, while the D8EA plug listing specifies four plugs for the motorcycle.
Check the conversion package before buying coils
The module-only Dyna S package suits an order that retains compatible coils and wires. The featured stock-type coil pair replaces 30500-300-013 and is already mounted on brackets. Compare the existing mounts and the exact package before ordering separate hardware.
Questions about ignition systems
What changes between the Premium and Ultimate Dyna S packages?
Premium kit 07-9987 pairs the Dyna S module and Dynatek wires with two generic aftermarket 3.3-ohm coils. Ultimate kit 07-9986 instead supplies two Dynatek-brand 3-ohm coils. Compare the actual coil brand and resistance rather than assuming every component in a Dyna S bundle is Dynatek-branded.
What does the module-only listing require if I retain the existing coils?
It states stock coils or coils of at least 3 ohms. Identify the coils actually fitted and follow the ignition manufacturer’s instructions before choosing the module-only package; a previous owner’s coil change matters more than the frame year.
Are the separate Dynatek coil wires supplied as four finished leads?
Coil-and-wire package 07-9974 describes two 4-foot, 7 mm copper-core wires that can supply up to four cuts. The plug ends are finished, but coil terminals are loose for custom fitting. Compare required reach and termination work rather than treating it as four pre-sized replacement leads.
Not sure which part you need?
Send your model and year, plus photos of your existing part and any changes to the original setup.