Honda motorcycle parts
Choose your model and year to see parts listed for your bike.
Choose your model and year to see parts listed for your bike.
1977 Honda CB750K · Switches & Sensors Buying guide
The neutral switch does not include its O-ring, while the oil-pressure lead has its own rubber cover. Rear brake-light operation also uses a separately listed spring with a specific late-CB750K application.
Honda neutral switch with screwGenuine Honda switch listed for the SOHC CB750K; the O-ring is explicitly not included.View part
Oil-pressure warning switchReplacement oil-pressure switch listed for the CB750K, referencing 37240-P13-013.View part
Rear brake-light stop switchReplacement rear stop-light switch listed for the SOHC CB750K; the operating spring is listed separately.View part
Related parts: Neutral-switch O-ring; listed size 18 × 3 · Oil-pressure lead with rubber cover · 1977–78 CB750K rear-switch spring
The category includes hydraulic and non-hydraulic brake-switch applications. Check the equipment actually fitted before choosing one. For the rear circuit, compare the switch and operating spring separately; the related spring’s description specifically lists the 1977–78 CB750K rather than every early model.
The featured neutral switch comes with a screw, but its O-ring is sold separately. The linked oil-pressure wire assembly supplies a lead and rubber cover. Test the relevant circuit before buying a switch, and follow the service manual when an oil-pressure warning requires investigation.
No. The listing states that the O-ring is sold separately, even though the switch includes a screw. The linked seal is listed at 18 × 3. Confirm the service parts required before starting the replacement.
The related rear stop-switch spring lists the 1977–78 CB750K application and reference 35357-393-000. It is the spring attached to the rear stop-light switch. Compare the fitted arrangement before ordering for modified brake equipment.
A switch is only one part of the warning circuit. The wiring and the engine’s actual oil-pressure condition also need proper diagnosis. Use the appropriate service manual before treating the warning as a faulty switch or replacing electrical parts.
Send your model and year, plus photos of your existing part and any changes to the original setup.
Select your exact model and year to narrow your results.
Choose your model and year.