1974 Honda CL360K0 Turn Signal Mounts & Seals

Préciser la sous-catégorie

Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD

Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD

Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...

Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD

Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...

Honda CB750 CB550 CB500 CB360 rear turn signal stay 33441-369-000

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD

Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...

Comparer

1974 Honda CL360K0 · Turn Signal Mounts & Seals Buying guide

Keep front dimensions and rear extension separate

The front stay measures 65mm at the body and 90mm overall. The rear stay is described as an extended 125mm part. Compare like-for-like measurements rather than treating every quoted length as the same dimension.

Parts to consider

Chrome front signal stay65mm body, 25mm thread and 90mm total length.Voir la pièce

Extended rear signal stayChrome 125mm rear stay; an extended-length choice rather than a stock-length promise.Voir la pièce

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

Signal-lamp gasketReplacement reference 33443-268-671; check the existing housing and lens profile.Voir la pièce

Pièces connexes : 6mm screw-on reflector

Measure both ends of the motorcycle independently

A front stay’s 65mm body measurement does not make it the same product as a rear stay described by another length. Record the mounting and exposed dimensions of each existing part. Confirm the desired rear signal position before choosing the extended option.

Identify the lamp before replacing its seal

The signal gasket replaces 33443-268-671 and pairs with the merchant’s lens 11-2110 and lamp 11-2122. Compare the fitted housing before choosing it after a lamp swap. The related screw-on reflector is separate and uses a 6 mm thread.

Common buying questions

Is the rear stay an original-length replacement?

The featured rear stay is described as an extended 125mm version. Choose it for the required mounting position after measuring your motorcycle; do not treat that length as a verified original CL360K0 specification.

Why is the front stay described as both 65mm and 90mm?

The front stay has a 65mm body and a 25mm threaded section, giving 90mm overall. Compare the same portions of the old stay when deciding whether the replacement has the reach you need.

Can I select a gasket just from the bike’s year?

Identify the lamp and lens as well. The gasket’s reference is 33443-268-671, but a replacement or aftermarket lamp may have a different sealing profile even when mounted on the correct motorcycle.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1974 Honda CL360K0

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie