VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CL360K0 Scrambler — pièces de moto

Suspension service on a 1974 Honda CL360K0 requires separate checks for steering fasteners, shock joints and pivot protection. The featured choices cover stem hardware and shock rubbers. Related fork boots and swingarm parts address other service positions after the fitted assemblies are identified.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB1000 CB900 CB750 CB550 chrome steering stem nut 90304-415-000

Honda CB Chrome Steering Stem Nut ~ Replaces 90304-415-000

$9.95 USD
49-0786
Replace your steering stem nut with this Chrome Steering Stem Nut, hex nut size 30mm, replacing OEM #90304-415-000.Sold each. We also offer the matching...
Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Honda CB750 CB550 CB500 CB450 CB400 fork cap o-ring (set 2) 94608-50000

Honda CB Fork Cap O-Ring (Set/2)

$2.95 USD
49-0790
Replace your fork cap O-rings with this Fork Cap O-Ring Set of 2, replacing OEM #94608-50000 (qty 2).Key Features• Fork cap O-rings• Set of...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB1000 CB900 CB750 CB550 steering stem washer 90503-283-000

Honda CB Steering Stem Washer ~ Replaces 90503-283-000

$3.50 USD
49-0787
Replace your steering stem washer with this Chrome Steering Stem Washer, replacing OEM #90503-283-000.Sold each, order the quantity you require.Key Features• Chrome steering stem...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB450 CB400 CB360 CL360K0 fork dust boot set 91254-413-881

Honda CB Fork Dust Boot Set ~ Replaces 91254-413-881

$15.95 USD
73-0189
Refresh your fork seal dust boots with this Fork Seal Dust Boots Set of 2. 33mm size. Replaces OEM #91254-413-881.Key Features• Fork seal dust...
Nouveau
Honda CB900 CB750 CB400 rear wheel bearing retainer 41231-286-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-286-000

$31.95 USD
73-1068
Secure your rear wheel bearing properly with this Rear Wheel Bearing Retainer – Brake Disc Side, designed as a direct replacement for the original...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1974 Honda CL360K0 · Suspension & Wheel Parts Buying guide

Check each assembly before choosing its service parts

A fork-tube size, a pivot-cap position and a steering nut’s hex size describe different interfaces. Match the part to its assembly and avoid treating a custom shock’s advertised length as a factory specification.

Parts to consider

Honda CB Chrome Steering Stem Nut ~ Replaces 90304-415-000 Chrome steering-stem nutSold individually, with a 30mm hex; reference 90304-415-000.Voir la pièce Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Shock joint rubbers, set of twoTwo replacement joint rubbers referencing 52484-292-000.Voir la pièce Honda CB Steering Stem Washer ~ Replaces 90503-283-000 Chrome steering-stem washerSold individually; replacement reference 90503-283-000.Voir la pièce

Pièces connexes : 33mm fork dust boots, set of two · Swingarm pivot dust caps, set of two · Swingarm grease fittings, pack of two

Inspect the fitted front end before ordering

The linked dust-boot specification is 33mm, while the steering-stem nut is described by a 30mm hex. Those dimensions do not establish every detail of a replacement front end. Compare the actual components and use the correct service documentation for the assembly procedure.

Treat universal short shocks as a separate project

The grid includes 290mm custom shocks in different mounting configurations. Those catalog measurements do not verify an original CL360 length or direct interchange. Establish mounting type, bushing dimensions and clearance before considering a custom suspension change; the featured parts cover specific service items.

Common buying questions

Do the swingarm dust caps arrive as a pair?

Yes. The linked product contains two dust seal caps for the ends of the pivot. That package does not establish the condition of the internal pivot parts; assess those separately during the service.

Is the steering nut’s 30mm measurement its thread size?

No. The supplied specification identifies a 30mm hex, not the thread diameter or pitch. Match the replacement reference and installed stem; do not use that hex dimension to approve a changed front end.

Are the 290mm shocks a verified stock-length option?

No. They are described as custom shorty shocks with differing eye-to-eye or eye-to-clevis arrangements. Their advertised length is a product measurement, not a verified original CL360K0 suspension specification.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CL360K0

Votre panier

×