VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CL360K0 Scrambler — pièces de moto

Fuel-system work on a 1974 Honda CL360K0 may involve the carburetor internals, a mounting holder or the tank connection. Identify the affected area first, then compare the package contents and the actual components fitted before building a combined repair order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Solde
Honda CB750 CB550 CB500 CB400 CB360 gas cap rubber seal 17534-323-300

Honda CB Gas Cap Rubber Seal ~ Replaces 17534-323-300

$8.19 $7.95 USD
You save $0.24
20-0039
Replace your mid-'70s Honda gas cap rubber seal with this Gas Cap Rubber Seal, replacing OEM #17534-323-300. Broad fitment across the SOHC CB750K, CB500/CB550...
Épuisé
Honda CB throttle sleeve 53141-300-010

Honda CB Throttle Sleeve ~ Replaces 53141-300-010

$9.95 USD
02-2462
Refresh the throttle feel on your Honda with this Nylon Throttle Sleeve, a replacement for OEM Ref. #53141-300-010 with exceptionally broad fitment across the...
Honda CB750 CB550 CB500 CB450 CB400 gas fuel tank cap latch assembly

Honda CB Gas/Fuel Tank Cap Latch Assembly

$44.95 USD
20-0083
Replace your gas cap latch with this Gas/Fuel Tank Cap Latch Assembly. Includes a chrome latch, return spring, latch mounting pin, and C-clip.Key Features•...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Nouveau
Honda CB550 CB500 CB360 rear fuel tank holder rubber 17613-286-000

Honda CB Rear Fuel Tank Holder Rubber ~ Replaces 17613-286-000

$9.95 USD
12-0133
Restore proper rear fuel tank mounting on your mid-'70s twin or four with this Rear Fuel Tank Holder Rubber, a direct replacement for OEM...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000• Honda part name: Bolt,...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000• Honda part name: Spring,...
Honda CB450 CB360 CB350 CL350K0 CL350K2 fuel petcock 16950-292-000

Honda CB Fuel Petcock ~ Replaces 16950-292-000

$34.95 USD
29-0542
Replace your CB450, CL450, CB350, or CB360 fuel petcock with this Fuel Petcock, replacing OEM #16950-292-000 with M16 x 1.5 threads. Please verify the...
Honda CB750 CB550 CB450 CB400F fuel tank cap latch 17510-323-310

Honda CB Matte Black Fuel Tank Cap with Latch ~ Replaces 17510-323-310

$69.95 USD
07-9967
Restore your classic Honda's tank with a factory-look matte-black finish using this Matte Black OEM-Type Fuel Tank Cap with Latch Assembly. A direct replacement...
Honda CB750 CB550 CB400F CB450 CB360 tank cap latch assembly black

Honda CB Gas/Fuel Tank Cap Latch Assembly ~ Black

$29.95 USD
01-9934
Replace a broken, missing, or worn-out fuel cap latch with this Gas/Fuel Tank Cap Latch Assembly in black. Includes the black latch, return spring,...
Honda CB360 CL360 carb slide diaphragm rubber set 16022-369-004

1974-76 Honda CB360 / CL360 Carb Slide Diaphragm Rubber Set ~ Replaces 16022-369-004

$44.95 USD
48-1500
Replace your CB360 or CL360 carb slide diaphragm rubbers with this Carb Slide Diaphragm Rubbers Set. Includes 2 diaphragms (rubber portion only as shown)...
Nouveau
Honda CB360 CL360 carb rebuild kit

1974-76 Honda CB360 / CL360 Carb Rebuild Kit

$17.57 USD
48-1394
Rebuild your CB360 carb with this Carb Rebuild Kit.Note: each kit rebuilds one carb, order the quantity you require.Key Features• Carb rebuild kit• Rebuilds...
Honda CB750 CB550 joker machine black gas tank cap latch assembly

Honda CB Joker Machine Black Gas Tank Cap Latch Assembly

$79.95 USD
73-1157
Upgrade your fuel tank latch with the Joker Machine Custom Black Gas/Fuel Tank Cap Latch Assembly. Designed as a premium alternative to the discontinued...
Honda CB360 CL360 float needle and seat 16011-369-004

1974-76 Honda CB360 / CL360 Float Needle & Seat ~ Replaces 16011-369-004

$13.95 USD
48-1520
Replace your CB360 or CL360 float needle and seat with this Float Needle & Seat, made in Japan, replacing OEM #16011-369-004.Key Features• Float needle...
Nouveau
Honda CB360 CL360 carb intake manifold 16211-369-000

1974-76 Honda CB360 / CL360 Carb Intake Manifold ~ Replaces 16211-369-000

$27.95 USD
48-1472
Replace a single CB360 or CL360 carb intake manifold with this Carb Intake Manifold, replacing OEM #16211-369-000.Note: this is for one holder, order the...
Nouveau
Honda CB700 CB650 CB550 fuel tank front rubber cushion 17611-KE8-000

Honda CB Genuine Honda 17611-KE8-000 Fuel Tank Front Rubber Cushion ~ Replaces 17611-KE8-000

$17.95 USD
99-5145
This genuine Honda front fuel tank rubber cushion mounts to the frame and supports the front of the gas tank on select classic Honda...
Comparer

1974 Honda CL360K0 · Fuel System Buying guide

Match each fuel-system part at its own connection

The diaphragm package contains two rubbers and two O-rings. The intake holder is supplied singly. The petcock uses an M16 × 1.5 tank connection, which matters when the tank has been changed.

Parts to consider

1974-76 Honda CB360 / CL360 Carb Slide Diaphragm Rubber Set ~ Replaces 16022-369-004 Carb slide diaphragm rubber setTwo rubber diaphragms and two O-rings; replaces the rubber portion of reference 16022-369-004.Voir la pièce 1974-76 Honda CB360 / CL360 Carb Intake Manifold ~ Replaces 16211-369-000 Single carb intake holderOne holder, reference 16211-369-000; the specified band clamp is a separate choice.Voir la pièce Honda CB Fuel Petcock ~ Replaces 16950-292-000 M16 × 1.5 fuel petcockThreaded fuel valve with replacement reference 16950-292-000.Voir la pièce

Count carburetor parts by package coverage

The diaphragm set contains two rubber portions and two O-rings. The intake manifold purchase covers one holder, so it uses a different counting basis. Inspect the retained slide components and each holder before ordering; one package should not be assumed to cover unrelated carburetor work.

Verify the tank connection independently

The petcock replaces reference 16950-292-000 and specifies M16 × 1.5 threads. Compare that connection with the tank actually fitted, especially on a modified motorcycle. Confirm the outlet arrangement and clearance before purchase when the surrounding installation differs from the original configuration.

Buying questions

Does the diaphragm set include complete replacement slides?

It replaces the rubber portion of reference 16022-369-004 and contains two diaphragms plus two O-rings. Have the retained slide components inspected before choosing a rubber-only repair.

Does one intake-holder purchase cover both positions?

The intake manifold is supplied as one holder. Count the positions needing replacement separately, and check the specified clamp requirement before ordering rather than assuming a paired mounting package.

Will the petcock suit a replacement tank?

Check the replacement tank for an M16 × 1.5 connection, then compare the outlet arrangement and available clearance. The stated CL360 application does not verify a different tank or a changed fitting.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CL360K0

Votre panier

×