Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Allumage, contacteurs, bobines, bougies et rupteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Ignition Switch ~ Replaces 35100-303-007

$34.95 USD
12-0060
Fit the round-plug ignition switch on your early classic Honda with this Ignition Switch (round plug, 6-hole 4-wire type), replacing OEM #35100-303-007 / #35100-292-003...

Honda CB Ignition Coil ~ Replaces 30500-292-672

$37.95 USD
17-6923
Replace your CB450/CL450, CB500T, or CB350/CL350/SL350 ignition coil with this Ignition Coil, replacing OEM #30500-292-672 / #30500-312-000 / #30500-286-004 / #30500-286-007 / #30500-310-670. 12V...

Honda CB Condenser ~ Replaces 30250-369-004

$21.95 USD
26-5106
Replace your condenser with this Condenser, replacing OEM #30250-369-004 / #30280-292-672 / #30280-292-671.Key Features• Condenser• Replaces OEM #30250-369-004 / #30280-292-672 / #30280-292-671• Honda part...
Nouveau
Honda CB500 CB450 CL450K0 contact point right side 30203-292-003

Honda CB Contact Point ~ Right Side ~ Replaces 30203-292-003

$14.95 USD
14-0007
Replace the right-side contact point on your CB500T or CB450/CL450 with this Contact Point for the Right Side, replacing OEM #30203-292-003 / #30203-292-154.Key Features•...
Nouveau
Honda CB500 CB450 CB160 CL450K0 contact point left side 30204-292-003

Honda CB Contact Point ~ Left Side ~ Replaces 30204-292-003

$14.95 USD
14-0008
Match with the left-side contact point using this Contact Point for the Left Side, replacing OEM #30204-292-003 / #30204-292-154. Same fitment as 14-0007 plus...

1971 Honda CL450K4 · Ignition Parts Buying guide

Compare connectors, coil layout and point side

The round-plug switch, single-output coil and condenser are distinct choices. Left and right contact points are linked separately, so a service order should keep side-specific parts and individual quantities clear.

Allow room for the coil’s leads

The coil has a 19-inch spark-plug wire, a 6.5-inch blue lead with a dual female bullet connector and a 5.25-inch black/white lead with a male bullet connector. Compare the available route and actual connections before assuming it can occupy the old coil’s position unchanged.

Identify the points by side

The linked left point uses references 30204-292-003 and 30204-292-154; the right uses 30203-292-003 and 30203-292-154. Select the required side and verify the fitted ignition. Adjustment and timing still require the appropriate engine service instructions.

Buying questions

Will this coil connect directly to a modified electronic ignition?

Its specified primary resistance is 5 ohms, but that does not establish compatibility with every electronic system. Check the installed ignition manufacturer’s coil requirements and the wiring before choosing a replacement.

Why check the coil orientation when the bolt spacing matches?

The description notes a different wire exit from a beige Honda coil. Compare the actual lead routing and clearances as well as the approximate 80 mm mounting centers; bolt spacing alone does not settle installation.

Are the left and right contact points interchangeable order choices?

They are listed separately with side-specific reference numbers. Identify which side is being serviced and compare the existing component, rather than selecting either one simply because both appear in the same model category.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×