VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CL450K4 Scrambler — pièces de moto

For engine work on a 1971 Honda CL450K4, start with the assemblies that will be disturbed. Sealing kits, valves and retaining hardware need different checks; a broad rebuild order can otherwise miss a small fastener or duplicate a seal.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Moteur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 front sprocket lock plate set 23811-292-000

Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000

$5.95 USD
49-0782
Replace your front sprocket lock plate with this Front Sprocket Lock Plate with 2 lock plate bolts. Always good to replace these when installing...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Nouveau
Honda CB500 CB450 CL450K1 CL450K2 CL450K3 overhaul gasket set

Honda CB Overhaul Gasket Set

$64.95 USD
18-0098
Rebuild your CB500T or CB450/CL450 engine with this Engine Overhaul Gasket Set.Note: fits 5-speed CB450K models only.Key Features• Engine overhaul gasket set• For 5-speed...
Nouveau
Honda CB500 CB450 CL450K0 CL450K2 CL450K3 intake valve 14711-292-000

Honda CB Intake Valve ~ Replaces 14711-292-000

$26.95 USD
28-6920
Restore proper engine performance with this Intake Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Nouveau
Honda CB450 CL450 CB500T engine oil seal kit with 7 seals 91202-283-013

1968-76 Honda CB450 / CL450 / CB500T Engine Oil Seal Kit

$21.95 USD
01-9926
Refresh critical engine sealing points with this Engine Oil Seal Kit (7 Pieces), designed to replace common oil seals used in the engine assemblies...
Nouveau
Honda CB500 CB450 CL450K0 CL450K2 CL450K3 exhaust valve 14721-292-010

Honda CB Exhaust Valve ~ Replaces 14721-292-010

$26.95 USD
28-6919
Restore proper engine performance with this Exhaust Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part numbers...
Nouveau
Honda CB550 CB500 CB450 CL450K0 drive chain adjuster w nut and bolt

Honda CB Drive Chain Adjuster with Nut & Bolt

$24.95 USD
99-4854
Upgrade or restore your classic Honda motorcycle’s drive system with this Drive Chain Adjuster with Nut and Bolt — designed to keep your rear...
Honda CB750 CB550 drive chain adjuster screws black joker machine 90119-283-000

Honda CB Drive Chain Adjuster Screws ~ Black ~ Joker Machine ~ Replaces 90119-283-000

$59.95 USD
73-1059
Refresh your drive chain adjusters with these Joker Machine Brand Black Custom Type Drive Chain Adjuster Screws, set of 2, with gold-cadmium-plated nuts. Replaces...
Nouveau
Épuisé
Honda CB500 CB450 joker machine magnetic oil drain plug 90013-312-000

Honda CB Joker Machine Magnetic Oil Drain Plug ~ Replaces 90013-312-000

$64.95 USD
12-0108
Catch engine debris between oil changes with this Joker Machine Magnetic Oil Drain Plug with O-ring, replacing OEM #90013-312-000. High-quality 6061 billet aluminum body...
Nouveau
Honda CB500 CB450 CL450K0 front sprocket 15 tooth 23801-348-690

Honda CB Front Sprocket ~ 15 Tooth ~ Replaces 23801-348-690

$23.95 USD
99-4807
15 tooth front sprocket designed as a direct replacement for the original Honda component, matching OEM reference 23801-348-690. Plays a key role in final...
Honda CB500 CB450 CB400 CB360 CB350 cylinder head gasket 12909-428-003

Honda CB Cylinder Head Gasket ~ Replaces 12909-428-003

$2.95 USD
73-1186
Restore top-end sealing performance with this high-quality Cylinder Head Gasket. Designed to match OEM specifications, this gasket ensures a perfect fit and proper sealing...
Honda CB500 CB450 CB360 special oil filter rotor washer 90481-292-000

Honda CB Special Oil Filter Rotor Washer ~ Replaces 90481-292-000

$9.46 USD
29-7034
Replace your oil filter rotor washer with this Special Angled Oil Filter Rotor Washer (16mm), replacing OEM #90481-292-000.Key Features• Special angled oil filter rotor...
Honda CB500 CB450 CL450 cam chain 219T x 128 14401-283-003

Honda CB500 / CB450 / CL450 Cam Chain ~ 219T x 128 ~ Replaces 14401-283-003

$99.95 USD
52-3034
Replace your CB500T or CB450 cam chain with this Cam Chain 219T x 128, replacing OEM #14401-283-003. D.I.D (Daido) brand. Pitch .3061, peanut side...
Honda CB500 CB450 CL450 cam chain 219FTSS x 128 14401-283-003

Honda CB500 / CB450 / CL450 Cam Chain ~ 219FTSS x 128 ~ Replaces 14401-283-003

$99.95 USD
52-4012
Replace your CB500T or CB450 cam chain with this Cam Chain 219FTSS x 128, replacing OEM #14401-283-003. D.I.D (Daido) brand. Pitch .3061, stepped parallel...
Épuisé
Honda CB450 CL450K2 CL450K3 CL450K4 CL450K5 Athena overhaul gasket set

Honda CB Athena Overhaul Gasket Set

$99.95 USD
18-0297
Rebuild your CB450K or CL450K engine with this Athena Overhaul Engine Gasket Set. Athena of Italy is an original-equipment supplier to Yamaha, Honda, Kawasaki,...
Comparer

1971 Honda CL450K4 · Engine Parts Buying guide

Plan the order around the opened assemblies

Trace the repair from the engine joint to its seal and hardware. Keep final-drive retention separate from internal engine parts, and compare custom drain-plug dimensions with the case actually fitted.

Parts to consider

Honda CB Joker Machine Magnetic Oil Drain Plug ~ Replaces 90013-312-000 Magnetic drain plug with O-ringJoker Machine plug with an O-ring, M33.7 × 1.5 mm thread and 19 mm socket fitting.Voir la pièce Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000 Sprocket lock plate and boltsIncludes one retaining plate and two bolts. Plate reference: 23811-292-000.Voir la pièce Honda CB Special Oil Filter Rotor Washer ~ Replaces 90481-292-000 Angled oil-filter rotor washer16 mm angled rotor washer; compare reference 90481-292-000 with the existing part.Voir la pièce

Pièces connexes : Engine oil seal kit · Intake valve · Exhaust valve

Buy seals by repair scope

The linked oil-seal kit has seven listed seals, each with dimensions and reference numbers. Compare those entries with the engine positions being serviced. Intake and exhaust valves are separate, individually sold products, so the required valve positions also need to be identified.

Check custom hardware at the mounting point

The magnetic plug includes an O-ring and has a 45 mm outside diameter, projecting 19 mm from the case. Check that space as well as its thread. The sprocket retaining set instead supplies one plate and two bolts for a different assembly.

Buying questions

Can I use the motorcycle year alone to choose the oil seals?

Use the year to narrow the search, then compare the engine and seal locations. The kit supplies dimensions and references for seven seals, which are more useful when the engine or covers have been replaced.

Do the two valve listings make one complete valve set?

No. The intake and exhaust valves are separate individual items. Identify the positions that inspection has shown need replacement, and use the correct engine documentation before deciding the order quantities.

Is the rotor washer a general-purpose 16 mm washer?

It is described as an angled oil-filter rotor washer with reference 90481-292-000. Match that shaped part to the rotor assembly; diameter alone is insufficient for substituting an ordinary flat washer.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CL450K4

Votre panier

×