VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CL450K4 Scrambler — pièces de moto

The brake and clutch order for a 1971 Honda CL450K4 can involve the hand controls, rear linkage or internal clutch hardware. Identify the worn assembly first, then compare the fitted components and their supplied quantities before combining different service items.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB500 clutch tab washer 90431-292-000

Honda CB Clutch Tab Washer ~ Replaces 90431-292-000

$7.50 USD
73-0839
Replace your clutch tab washer with this Clutch Washer, 16mm size, replacing OEM #90431-292-000.Key Features• Clutch tab washer• 16mm size• Replaces OEM #90431-292-000• Honda...
Honda CB750 CB550 CB450 CB400F clutch lever 53178-369-700

Honda CB Clutch Lever ~ Replaces 53178-369-700

$9.95 USD
08-0006
Replace a worn silver-with-black-tip clutch lever with this Clutch Lever, a direct replacement for OEM #53178-369-700. Exceptionally broad fitment across the classic Honda lineup,...
Honda CB750 CB550 handlebar clutch lever pivot bolt and nut set 90114-310-000

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000

$6.95 USD
73-0996
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt & Nut Set, used to fasten the clutch lever in place....
Honda CB750 CB700 CB500 CB450 CL450K0 steel clutch plate 22321-MG8-000

Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000

$11.95 USD
39-1409
Replace your SOHC CB750, CB700SC Nighthawk, CB500T, or CB450/CL450 steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #22321-MG8-000 / #22321-283-000.Order the...
Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Épuisé
Honda CB750 CB550 CB450 gp-style clutch lever 53178-369-700

Honda CB GP-Style Clutch Lever ~ Replaces 53178-369-700

$9.95 USD
08-0080
Bring racetrack-inspired ergonomics to your cockpit with this Custom GP-Style Clutch Lever in silver. Features a more pronounced bend/kickback than the stock lever, for...
Honda CB750 CB700 CB650 CB550 CB500 brake rod joint pin w cotter pin

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Universal Honda-type front master cylinder assembly 13mm

Universal Honda-Type Front Master Cylinder Assembly ~ 13mm

$84.95 USD
08-0262
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Épuisé
Honda CB750 CB650 CB550 replacement brake lever for master cylinder

Honda CB Replacement Brake Lever for Master Cylinder 08-0262

$9.95 USD
08-0430
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Honda CB125S CB175 CB350 CB450 hand lever 53175-402-700

Honda CB Hand Lever ~ Replaces 53175-402-700

$9.95 USD
08-0066
Fit a silver-with-black-tip brake lever on your small-bore Honda with this Brake Lever, replacing a range of OEMs (#53175-402-700, #53170-216-670, #53175-286-000, #53170-286-670, #53170-329-010, #53170-369-700,...
Honda CB1000 CB500 CB450 CL450K0 clutch friction plate 22201-MA7-000

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000

$8.95 USD
39-1046
Replace your clutch friction plates with this Clutch Friction Plate, replacing OEM #22201-MA7-000 / #22201-283-000.Order the number of pieces required for your model.Key Features•...
Magura universal front master cylinder assembly 13mm

Magura Universal Front Master Cylinder Assembly ~ 13mm

$259.00 USD
08-0250
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Épuisé
Honda CB400 CB450 CB350 CB125S black hand lever 53175-467-000

Honda CB Black Hand Lever ~ Replaces 53175-467-000

$9.95 USD
08-0084
Replace a black-finish brake lever on your small-bore classic with this Brake Lever, replacing a range of OEMs (#53175-467-000, #53170-413-670, #53175-402-700, #53175-360-700, #53175-399-700). Fits...
Comparer

1971 Honda CL450K4 · Brake & Clutch Parts Buying guide

Separate hand controls from linkage and clutch hardware

A replacement lever, rod joint pin and clutch tab washer answer different repair needs. Inspect the mating parts in each assembly so a small component order does not overlook wear elsewhere.

Parts to consider

Honda CB Clutch Lever ~ Replaces 53178-369-700 Silver clutch lever with black tipSilver finish with a black rubber tip; replacement reference 53178-369-700.Voir la pièce Honda CB Brake Rod Joint Pin with Cotter Pin Brake rod joint pin and cotter pinJoint pin with a cotter pin; references 95015-52000 and 94201-16250.Voir la pièce Honda CB Clutch Tab Washer ~ Replaces 90431-292-000 Clutch tab washer16 mm clutch tab washer, referenced to 90431-292-000.Voir la pièce

Pièces connexes : Silver brake lever · Brake rod adjusting nut · Clutch pivot bolt and nut

Inspect both sides of a loose joint

The rod joint pin comes with a cotter pin, while the linked clutch pivot set contains one bolt and one nut. Check the components that each fastener passes through before ordering: replacing a pin alone does not establish the condition of its mating joint.

Treat lever shape as a fit check

The silver clutch and linked brake levers have black rubber tips. Compare their pivot, working attachment and clearance with the actual controls. A similar finish is useful for appearance but cannot establish mechanical interchange between brake, clutch or changed control assemblies.

Buying questions

Does the clutch pivot set contain more than one lever’s hardware?

Its contents are one pivot bolt and one nut. Compare that single set with the installed clutch perch, and check whether the lever itself is damaged before deciding which items to order.

Can I use a master-cylinder lever with a different brake control?

Choose a lever for the actual assembly it operates. A product intended for one replacement master cylinder is not established as interchangeable with other hydraulic or cable-operated controls by a shared category tag.

How do I choose the tab washer for a replacement clutch?

Identify the clutch hardware currently installed and compare its tab arrangement with reference 90431-292-000. The offered washer is 16 mm, but that nominal size alone does not establish compatibility with changed retaining hardware.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CL450K4

Votre panier

×