VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CL450K4 Scrambler — pièces de moto

For a 1971 Honda CL450K4 cockpit refresh, compare the actual handlebars and control arrangement before ordering grips or clamps. The available choices specify 7/8-inch bar sizing, but grip length, end style and the clamp fastening arrangement remain separate decisions.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips 95011-14100

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100

$16.95 USD
02-2424
Fit the correct grips on your earliest-era Honda with these Honda OEM-Type Rubber Grips. Accurate replicas of the factory grips fitted to the oldest...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1971 Honda CL450K4 · Handlebar Grips & Clamps Buying guide

Compare the grip area and the central clamp separately

The black replica grips have closed ends and a 130mm length. The black clamp set contains two pieces with hardware offered separately. Use those product facts to check the bars and controls being retained.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 95011-14100 Closed-end replica gripsBlack rubber grips, 130mm long, intended for 7/8-inch handlebars. Closed ends and references 95011-14100 / 95011-14200 define the offered pattern.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black handlebar clamp setTwo clamps for 7/8-inch bars, with reference 95014-22200. Replacement fastening hardware is offered separately.Voir la pièce

Plan the grip purchase around the controls

The grips are described for 7/8-inch handlebars and measure 130mm long. Compare their closed ends with the existing throttle sleeve and any bar-end equipment before purchase. The product sizing describes the offered grips; it does not establish the dimensions of every bar fitted to a K4.

Include the clamp fasteners in the inspection

The clamp title specifies a two-piece set, and its description offers hardware separately. Compare the clamps with the actual top yoke and the retained fastening parts. The bar diameter is only one check when the yoke, bars or fasteners have been changed.

Ordering questions

Does the common 7/8-inch size settle both purchases?

It is one product sizing check. The grips also require a length and end-style comparison, while the clamps need their mounting arrangement checked. Confirm each against the actual bars and controls rather than using diameter alone.

Will the closed-end grips suit existing bar-end accessories?

Compare the grip ends and available space with the accessories already fitted. These grips are closed-end products, so do not assume they accommodate an open-ended bar accessory arrangement without a suitable compatibility assessment.

Are fastening bolts included in the two-piece clamp set?

The clamp description offers hardware separately. Inspect the fasteners you intend to retain and establish the required replacements before ordering. The two-piece clamp count does not represent a complete hardware package.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CL450K4

Votre panier

×