VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB450K — Pièces de bras oscillant

Inspect the pivot and shock attachment on your 1973 CB450K swingarm before ordering sealing pieces or bushings. Thrust bushings and metal end caps supply separate sets of two. Check the retained bolt and sleeve, then identify any shock mounting bushing required at the other connection.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Comparer

1973 Honda CB450K · Swing Arm Parts Buying guide

Identify the pivot pieces without borrowing shock bushing dimensions

Thrust bushings reference 52109-283-300, caps 52144-283-010 and felts 52145-283-000. The locknut purchase includes its washer but no stated pivot bolt or sleeve. Shock bushing 40548-268-000 is individually supplied with separate length, OD and ID measurements.

Parts to consider

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300 Two bronze thrust pieces for the pivot52109-283-300 replacement set. Confirm the required pivot component and dimensions where the swingarm has changed; no complete dimensional specification is stated.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010 Two metal caps at the pivot ends52144-283-010 replacement set. Compare the caps removed and inspect the felts separately; felt contents are not stated as included.Voir la pièce Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000 Pivot locknut with its washer90354-268-000 locknut and 90526-268-000 washer. Inspect the retained pivot bolt and sleeve; they are not described as part of this purchase.Voir la pièce

Pièces connexes : Left and right pivot felts, set of two · Individual shock connection bushing

Compare each bronze bushing at the actual component replaced

The thrust set gives 52109-283-300, while another bronze swingarm bushing product lists its own two-piece set without dimensions. Identify the removed component and confirm the required measurements if the swingarm is altered. Shared material and set quantity do not establish the same replacement part or a guaranteed modified fit.

Keep the shock mounting specification at that connection

Shock bushing 40548-268-000 is sold individually and measures 19mm length, 22mm OD and 10mm ID. Compare the original at the shock-to-swingarm mount before ordering. Those measurements do not specify the thrust bushings or metal pivot caps, and individual supply leaves the needed repair quantity to inspect.

CB450K buying questions

Does ordering the pivot locknut and washer provide a replacement bolt or sleeve?

Those additional components are not stated as included. The purchase names locknut 90354-268-000 and washer 90526-268-000. Inspect the retained bolt, sleeve and pivot sealing pieces, then identify any separate replacements required instead of assuming a complete pivot hardware kit.

How can I compare the bronze bushing sets for a non-original swingarm?

Identify which pivot component is being replaced and obtain its required measurements. The thrust product gives a Honda reference but no full dimensions, and the other bronze set also leaves dimensions unstated. Material and two-piece supply do not verify an altered swingarm’s fit.

Are felt seals confirmed inside the metal end-cap purchase?

The metal cap listing states two pieces against 52144-283-010. Felts are a separate left-and-right set at 52145-283-000. Compare both components removed and choose their required replacements independently rather than treating the cap package as a combined sealing kit.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB450K

Votre panier

×