VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB450K — Guidon et commandes

Plan the controls and upper bar support together when renewing your 1973 CB450K handlebar parts. The black rubber grips have closed ends and a stated 135mm length. The separate two-clamp set needs its own mounting and hardware comparison before you complete the purchase.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Type closed-end grips end detail 53165-342-670

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670

$17.95 USD
02-2423
Take your early-'70s Honda back to factory spec with these Honda OEM-Type Rubber Grips. Faithful replicas of the original factory grips, in black closed-end...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1973 Honda CB450K · Handlebar Buying guide

Check the grip interface and the upper support separately

Grips reference Honda 53165-342-670 / 53166-342-670, while the black clamps replace 95014-22200. Both list a 7/8-inch bar application. The grip description leaves inside dimensions and quantity unstated; clamp hardware is offered separately.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-342-670 135mm closed-end rubber grip optionFactory-style black replicas referencing Honda 53165-342-670 / 53166-342-670. Check the grip’s inside fit on the actual sleeve, available length and supplied contents.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Two black clamps for the upper bar mountSet of two for stock 7/8-inch bars, replacing Honda 95014-22200. Compare the fitted upper triple-clamp arrangement and select required hardware separately.Voir la pièce

Identify what the throttle side actually needs

A grip goes over the throttle sleeve, so the stated bar size does not supply every measurement needed there. Establish the sleeve’s outside fit requirement and compare the grip’s inside dimensions before ordering for a changed throttle. Check the stated 135mm length against the control space as well.

Make a separate list for the upper mount

The black clamp set specifies two clamps and points to hardware sold separately. Record the upper mounting arrangement and the fastening information it requires. A matching bar diameter cannot confirm bolt spacing or threads on an undocumented riser assembly, and the grip references do not resolve that separate interface.

Buying questions

What should I establish before ordering both grips for a modified throttle assembly?

Identify the fitted sleeve and the fit required on the opposite bar side. Compare usable length with 135mm, then confirm package contents. Neither the two Honda references nor the 7/8-inch bar application gives an explicit purchase quantity or every inside measurement.

How should I compare the clamps when retaining aftermarket risers?

Check the risers’ bar support and fastening arrangement against the replacement clamps. The listing states stock 7/8-inch bars and Honda 95014-22200 without bolt-spacing or thread dimensions. Obtain those missing mount details before treating the two-clamp set as suitable.

Which grip details matter if bar-end hardware must remain?

Determine how the retained accessory attaches and whether it requires an opening through the grip end. This option is closed-end and 135mm long. Compare those features with the actual accessory arrangement; an included opening or guaranteed clearance is not stated.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB450K

Votre panier

×