VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB450K — Jantes, rayons, joints de roue et valves

Identify the hub component requiring replacement on your 1973 CB450K before ordering a bearing, seal or retainer. The front bearing uses code 6302-2RS, while the rear seal has a dimensional specification. Compare the wheel position and removed component, then confirm the number each purchase supplies.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Nouveau
Honda CB750 CB500 CB450 rear wheel bearing retainer 41231-283-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-283-000

$26.95 USD
28-4015
Replace your rear wheel bearing retainer with this Rear Wheel Bearing Retainer (sprocket side), replacing OEM #41231-283-000. Used on the sprocket side of the...
Honda CB650 CB550 CB500 CB450 rear wheel seal 34 x 55 x 9

Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9

$5.95 USD
27-9042
Replace your CB650, CB500T/CB550, or CB450K rear wheel seal with this Rear Wheel Seal, 1 piece, 34 x 55 x 9mm. Made in Japan...
Comparer

1973 Honda CB450K · Rims, Spokes, Wheel Seals & Tire Valve Stems Buying guide

Compare the removed component and its exact wheel position

The front bearing states two used per wheel without clear pack quantity. Rear seal supply is one 34 × 55 × 9mm piece. Front retainer 44643-300-000 and rear retainer 41231-283-000 are separate products, with the rear identified for sprocket-side use.

Parts to consider

Honda CB 6302-2RS Front Wheel Bearing Front bearing identified as 6302-2RSJapanese-made bearing with two used per front wheel stated. Confirm supplied pack count and compare the original marking before ordering for the repair.Voir la pièce Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9 Rear wheel seal, one piece supplied34 × 55 × 9mm seal made in Japan by an OEM supplier. Check the fitted rear hub and removed seal dimensions independently of the front bearing choice.Voir la pièce Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000 Front retainer replacing 44643-300-000Separate front wheel bearing retainer. Compare the removed front hub component; its description does not establish a bearing supplied with it.Voir la pièce

Pièces connexes : Separate sprocket-side rear retainer

Confirm the bearing contents before setting purchase quantity

The front bearing description states two used per wheel and asks buyers to order the number needed, without an unambiguous supplied-piece count. Inspect the service requirements and match 6302-2RS at the actual bearing. Confirm how many one purchase supplies before deciding the number of orders needed for both positions.

Check a changed hub from its own sealing requirements

The rear seal’s 34 × 55 × 9mm dimensions and one-piece supply identify this product. Compare the removed seal and fitted rear hub, particularly where the wheel was replaced. The original motorcycle application does not document every replacement hub or establish the front bearing and retainer requirements of that changed assembly.

CB450K buying questions

Does the front bearing’s two-used wording establish two bearings in one purchase?

It gives the required front-wheel count rather than clear supplied pack quantity. Confirm contents and inspect which positions need replacement, using the installed 6302-2RS marking as part of the comparison. Do not assume one purchase supplies both bearings or additional hub hardware.

What should I check before choosing a retainer for a substituted wheel?

Identify the actual hub and the retainer removed, then compare its front or sprocket-side rear position with 44643-300-000 or 41231-283-000 respectively. The two descriptions do not establish every replacement wheel’s fit or a bearing included with either retainer.

What size and quantity are stated for the rear wheel seal?

The rear wheel seal supplies one piece measuring 34 × 55 × 9mm, made in Japan by an OEM supplier. Compare the removed seal and its location in the fitted rear hub before ordering, especially where a replacement wheel is installed.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB450K

Votre panier

×