VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1973 Honda CB450K — Câbles

Choose the speedometer cable for your 1973 CB450K from the fitted drive, retained instrument and required reach. The black replacement gives a Honda reference and end-to-end measurement. A separate protective plug has its own dimensions, which do not describe the cable’s attachment or calibration.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Câbles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 speedometer cable 44830-425-870

Honda CB Speedometer Cable ~ Replaces 44830-425-870

$22.66 USD
51-2304
Replace your CB speedometer cable with this Speedometer Cable in black, replacing OEM #44830-425-870. End-to-end length 38.5". Made in Japan.Key Features• Speedometer cable, black•...
Honda CB1000 CB900 CB750 CB650 speedo gear plug

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...
Comparer

1973 Honda CB450K · Cables Buying guide

Use overall cable length with the actual end interfaces

The Japanese-made cable replaces Honda 44830-425-870 and measures 38.5 inches end-to-end. Exact end threads and drive-tip dimensions are unstated. The gear plug is described for drive cleanliness, with 15mm outer diameter and 22mm length.

Parts to consider

Honda CB Speedometer Cable ~ Replaces 44830-425-870 38.5-inch black replacement cableMade in Japan, referencing Honda 44830-425-870. Check the complete required reach and both interfaces; exact attachment threads and drive-tip dimensions are not stated.Voir la pièce Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug Drive-cleanliness plug with separate dimensions15mm outer diameter by 22mm long. Compare the actual protective opening; these measurements do not specify cable attachment or provide a speed input.Voir la pièce

Compare measurements on the stated overall basis

The cable figure is expressly end-to-end, so compare an equivalent overall requirement rather than an assumed casing-only length. A changed instrument position can alter the required reach. Verify both end interfaces alongside that comparison, since overall length and a Honda reference do not give every connection dimension.

Check any changed drive before choosing connections

An altered front end may use a drive whose interface needs identifying directly. Match that connection and the instrument input before selecting the cable, and verify a custom gauge’s mechanical requirement separately. The protective plug’s outer dimensions cannot supply the missing thread or drive-tip information for that cable choice.

Buying questions

Which length should I compare if my removed cable’s casing was measured alone?

The listing gives 38.5 inches end-to-end, without a separate casing-only figure. Establish the equivalent overall measurement needed for your comparison or obtain the missing casing information. Keep the measurement bases distinct before deciding whether the replacement has the required reach.

What should I record when retaining a replacement front wheel or drive?

Identify the drive interface and the cable-end fit it needs, together with the retained gauge connection. Exact threads and drive-tip measurements are not provided here. Compare the required reach and mechanical input as separate details before completing the cable order.

How do I choose the plug when the drive opening has changed?

Compare the actual opening and protection requirement with the listed 15mm outer diameter and 22mm length. The stated role is keeping the original drive gear clean. Confirm suitability for the changed arrangement without inferring another drive’s sealing or cable dimensions.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1973 Honda CB450K

Votre panier

×