VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Joints et fixations

Separate the seal quantity, retaining pieces and rubber-stop requirement in your 1972 CB450K exhaust order. One port gasket or ten per pack are explicit purchase choices. The stand stopper references a different component, and the descriptions do not establish a complete headpipe mounting package.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Joints et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB kick stand stopper rubber 95011-61000

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000

$2.95 USD
07-4624
Replace a worn kick stand stopper with this Kick Stand Stopper Rubber "A", a direct replacement for OEM #95011-61000. Exceptionally broad fitment across the...
Honda CB500 CB450 CL450K2 exhaust headpipe gasket (each) 18291-283-010

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-283-010

$3.58 USD
17-2817
Replace one exhaust port gasket on your CB500T or CB450/CL450 with this Exhaust Port Gasket, 1 piece, replacing OEM #18291-283-010 / #18291-ME9-000 / #18291-MM8-880.Sold...
Honda CB500 CB450 exhaust headpipe gaskets (pk 10) 18291-283-010

Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18291-283-010

$29.95 USD
17-3817
Stock up on exhaust port gaskets for your CB500T or CB450/CL450 with this 10-pack, replacing OEM #18291-283-010 / #18291-ME9-000 / #18291-MM8-880.Key Features• Exhaust port...
Comparer

1972 Honda CB450K · Gaskets & Mounting Hardware Buying guide

Build the order from sealing and mounting requirements

Both gasket listings reference Honda 18291-283-010, 18291-ME9-000 and 18291-MM8-880. The stand stopper is rubber A, referenced to 95011-61000. Package counts describe supplied seals, while retaining hardware and stopper fit require separate checks.

Parts to consider

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-283-010 Port seal sold individuallyOne-piece headpipe port gasket referencing Honda 18291-283-010 / 18291-ME9-000 / 18291-MM8-880. Count the serviced joints to establish the order quantity.Voir la pièce Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18291-283-010 Port seals supplied ten per packBulk gasket package with the same three Honda references as the individual option. Its contents do not establish included headpipe retainers or fasteners.Voir la pièce Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000 Separate kick stand stopper rubber ARubber component replacing Honda 95011-61000. Identify the fitted stop mount and obtain any dimensions or contents information needed before ordering.Voir la pièce

Keep other exhaust seals on separate lines

These products identify the engine-side port gasket rather than a universal seal for every exhaust joint. If another joint is part of the work, identify its component separately. A ten-piece package does not expand the gasket’s stated function or establish compatibility with a different joint in a custom system.

Complete the mounting list independently

The gasket descriptions state sealing pieces rather than supplied collars, studs or nuts. The rubber stopper also does not establish a full mounting-hardware set. Check those supporting requirements against the fitted headpipes and stop arrangement, then confirm contents for every separate purchase needed by the job.

Buying questions

How do I confirm a gasket choice when the exhaust has several different joints?

Identify the seal required at each joint before ordering. The references here apply to the described engine-side headpipe port gasket. Compare a separate component for any other location, and confirm changed headpipe requirements where exact dimensions are not given.

What should be checked alongside the seal when a headpipe is being remounted?

Identify the retaining pieces and fasteners needed by that fitted assembly, including which are being renewed. The gasket packages do not state those components as supplied. Keep their compatibility and contents checks separate from calculating the port-seal purchasing quantity.

Can the photograph establish the rubber stopper quantity I should buy?

The stopper description does not explicitly state its package count. Identify the number and fit required by the actual stop arrangement, then confirm what one purchase supplies. Use the Honda reference and mounting comparison rather than deriving contents from the image.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×