VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Pipes d’admission, manchons et colliers

Inspect the intake holder connection on your 1972 CB450K before deciding whether one position or both need renewal. The purchase supplies a single holder with gasket. Match the retained attachment and inspect the clamps separately so that the order covers the actual intake mounting repair.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pipes d’admission, manchons et colliers

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB450 CL450K0 CL450K2 CL450K3 CL450K4 carb holder 16211-283-000

Honda CB Carb Holder ~ Replaces 16211-283-000

$23.95 USD
48-1475
Replace a single CB450 or CL450 carb holder with gasket using this Carb Holder with Gasket, replacing OEM #16211-283-000.Note: this is for one holder....
Comparer

1972 Honda CB450K · Carb Holders, Air Box Boots & Clamps Buying guide

Use the holder’s own contents and application count

Reference 16211-283-000 identifies this holder. One is supplied with its gasket, and two are stated as used per bike. The required band clamp is separately identified; a holder purchase does not describe an air-box boot or an entire intake-rubber package.

Parts to consider

Honda CB Carb Holder ~ Replaces 16211-283-000 Single intake holder and gasketHolder referencing Honda 16211-283-000, supplied with gasket. One holder per purchase; two used per bike. The specified band clamp is separate. Compare the intake connection before choosing the quantity and any additional clamp hardware.Voir la pièce

Inspect both positions before calculating the order

The two-per-bike statement describes the installed requirement, while one holder with gasket describes the purchase. Assess each position and order the holders actually being renewed. Do not apply that pair count to filters, clamps or other intake parts whose supplied quantities are separately stated.

Identify clamps independently of the gasket repair

The gasket is included with this holder, but the specified band clamp is separate. Compare the existing clamp and the holder connection if earlier work changed either component. Confirm any missing size or attachment detail needed for substituted clamp hardware before selecting it.

Holder coverage and separate hardware questions

What remains separate when ordering both holders?

Two purchases cover two holders and their included gaskets. The band clamps are identified separately and are not listed as supplied. Check their condition and compatibility independently before adding replacements for those locations.

How do I distinguish this holder from an air-box connection?

Identify the part’s location, mounting and reference on the retained intake. This listing supplies the 16211-283-000 holder with gasket. It does not name a separate air-box boot, so a repair elsewhere in the intake needs its own component identification.

What should I verify if a different carburetor was fitted?

Compare the actual holder attachments and reference 16211-283-000 with the carburetor and intake retained. One holder with gasket is supplied, without complete mounting dimensions. Confirm any missing measurement required by changed parts and check band-clamp compatibility separately.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×