VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB450K — Câbles

Compare speedometer cable length and end fit for the arrangement on your 1972 CB450K. The replacement lists 38.5 inches end-to-end, black finish and Japanese manufacture. A separate drive-gear plug has a protective role, with its own dimensions that should remain separate from the cable checks.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Câbles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 speedometer cable 44830-425-870

Honda CB Speedometer Cable ~ Replaces 44830-425-870

$22.66 USD
51-2304
Replace your CB speedometer cable with this Speedometer Cable in black, replacing OEM #44830-425-870. End-to-end length 38.5". Made in Japan.Key Features• Speedometer cable, black•...
Honda CB1000 CB900 CB750 CB650 speedo gear plug

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...
Comparer

1972 Honda CB450K · Cables Buying guide

Match length and connections to the fitted drive and gauge

The cable replaces Honda 44830-425-870 without stating exact end-thread or drive-tip measurements. The protective plug gives 15mm outer diameter and 22mm length. Assess each product at its intended connection instead of transferring measurements between them.

Parts to consider

Honda CB Speedometer Cable ~ Replaces 44830-425-870 Black 38.5-inch end-to-end cableJapanese-made replacement referencing Honda 44830-425-870. Establish required reach and both end interfaces; exact thread and drive-tip dimensions are unstated.Voir la pièce Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug Protective plug with stated outer dimensions15mm outer diameter and 22mm length, described for keeping the original speedo gear clean. Compare the actual opening and the separate protection requirement.Voir la pièce

Use the stated length on the same measurement basis

The description calls 38.5 inches the end-to-end length. Compare the cable requirement on that basis instead of assuming the figure measures only the outer casing. A relocated gauge or changed bar arrangement still needs a reach check together with verification of both cable-end interfaces.

A different front end needs connection identification

Identify the drive belonging to the front end installed and the input on the instrument you will retain. The listed Honda reference cannot document every conversion. Obtain missing connection dimensions before ordering, and check the gauge’s mechanical requirement independently where a custom instrument is part of the arrangement.

Buying questions

How should I compare length after changing the handlebars or gauge position?

Establish the reach needed for that intended layout and compare it with the listed 38.5-inch end-to-end length. Do not assume the old cable path proves the new requirement. Confirm both ends as well, particularly if a drive or gauge was replaced.

Is 38.5 inches the stated outer-casing measurement?

The description specifies end-to-end length, without separately stating a casing-only measurement. Keep that distinction when comparing a removed cable or planning a replacement layout. Obtain any additional measurement needed rather than treating the two measurement bases as interchangeable.

What are the gear plug’s dimensions and intended use?

The plug is listed at 15mm outer diameter and 22mm long, for keeping the original speedometer drive gear clean. Compare the fitted opening and protective requirement. It is separate from the cable, whose connections and required reach need their own checks.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB450K

Votre panier

×