VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB400TIZ — Freins et embrayage

The original 1979 Honda CB400TI Hawk I uses a mechanical front drum brake. Begin a control or brake order with that layout, then compare the black brake lever, silver clutch lever and rear shoe pair against the motorcycle’s fitted parts.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 handlebar clutch lever pivot bolt and nut set 90114-310-000

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000

$6.95 USD
73-0996
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt & Nut Set, used to fasten the clutch lever in place....
Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Honda CB750 CB400 CB125S clutch lever 53178-401-651

Honda CB Clutch Lever ~ Replaces 53178-401-651

$9.95 USD
08-0057
Replace a silver-finish clutch lever with this Clutch Lever, a direct replacement for OEM #53178-401-651. Fits the late-'70s CB750K/F Supersport plus the CB400TI/TII and...
Honda CB750 CB700 CB650 CB550 CB500 brake rod joint pin w cotter pin

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Honda CB1100 CB1000 clutch lever brake light switch 35330-413-003

Honda CB Clutch Lever Brake Light Switch ~ Replaces 35330-413-003

$15.95 USD
29-7029
Replace your front clutch lever safety stop switch with this Clutch Lever Stop Switch, replacing OEM #35330-413-003. This is the switch that allows the...
Universal Honda-type front master cylinder assembly 13mm

Universal Honda-Type Front Master Cylinder Assembly ~ 13mm

$84.95 USD
08-0262
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Épuisé
Honda CB750 CB650 CB550 replacement brake lever for master cylinder

Honda CB Replacement Brake Lever for Master Cylinder 08-0262

$9.95 USD
08-0430
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Honda CB900 CB450 CB400 CB350 clutch friction plate 22201-MAS-E00

Honda CB900 / CB450 / CB400 / CB350 Clutch Friction Plate ~ Replaces 22201-MAS-E00

$8.95 USD
39-1350
Replace your modern CB900F, CB350F, or CB400/CB450 clutch friction plate with this Clutch Friction Plate.Order the number of pieces required for your model.Key Features•...
Honda CB550 CB450 CB400 rear friction shoe set 43120-413-006

Honda CB550 / CB450 / CB400 Rear Friction Shoe Set ~ Replaces 43120-413-006

$34.95 USD
29-3102
Replace your CB400 or CB450 rear brake shoes with this Rear Brake Shoe Set of 2, replacing OEM #43120-413-006. Diameter 139mm, width 40mm.Key Features•...
Honda CB450 CB400 steel clutch plate 23311-413-000

1978-86 Honda CB450 / CB400 Steel Clutch Plate ~ Replaces 23311-413-000

$9.50 USD
99-4967
Upgrade or restore your classic Honda motorcycle’s transmission with this Steel Clutch Plate — a precision‑made replacement designed to fit and replace OEM #23311‑413‑000....
Honda CB450 CB400 performance clutch spring kit

1978-82 Honda CB450 / CB400 Performance Clutch Spring Kit

$27.95 USD
39-1503
Upgrade your CB400T or CB450T clutch springs with this High Performance Clutch Spring Kit of 4 springs. Made in Japan.Key Features• High-performance clutch spring...
Nouveau
Honda CB450 CB400 CB350 CB200 steel clutch plate b 22321-333-010

Honda CB450 / CB400 / CB350 / CB200 Steel Clutch Plate B ~ Replaces 22321-333-010

$9.50 USD
39-1326
Replace your CB400, CB450, CB350F/CB400F, or CB200 steel clutch plate B with this Steel Clutch Plate B, replacing OEM #22321-333-010.1 piece used per bike.Key...
Honda CB450 CB400 CB350 clutch friction plate 22201-333-010

Honda CB450 / CB400 / CB350 Clutch Friction Plate ~ Replaces 22201-333-010

$9.95 USD
39-1070
Replace your CB350F, CB400F, or CB400/CB450 clutch friction plate with this Clutch Friction Plate, replacing OEM #22201-333-010 / #22201-ML4-610.Order the number of pieces required...
Magura universal front master cylinder assembly 13mm

Magura Universal Front Master Cylinder Assembly ~ 13mm

$259.00 USD
08-0250
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Épuisé
Honda CB400 CB450 CB350 CB125S black hand lever 53175-467-000

Honda CB Black Hand Lever ~ Replaces 53175-467-000

$9.95 USD
08-0084
Replace a black-finish brake lever on your small-bore classic with this Brake Lever, replacing a range of OEMs (#53175-467-000, #53170-413-670, #53175-402-700, #53175-360-700, #53175-399-700). Fits...
Comparer

1979 Honda CB400TI Hawk I · Brake & Clutch Parts Buying guide

Order around the Hawk I brake layout

A front drum-brake control, a clutch lever and rear friction shoes are three separate service choices. Keep the wheel position and control mounting clear when comparing the available replacement parts.

Parts to consider

Honda CB Black Hand Lever ~ Replaces 53175-467-000 Black Brake LeverBlack-finish brake lever with a specific 1979 CB400TI application.Voir la pièce Honda CB Clutch Lever ~ Replaces 53178-401-651 Silver Clutch LeverSilver-finish replacement clutch lever; Honda reference 53178-401-651.Voir la pièce Honda CB550 / CB450 / CB400 Rear Friction Shoe Set ~ Replaces 43120-413-006 Rear Brake Shoe PairTwo rear brake shoes, specified at 139 mm diameter and 40 mm width.Voir la pièce

Start with the controls fitted

The black brake lever has a specific Hawk I application, while the silver clutch lever replaces reference 53178-401-651. A previously changed front end or lever perch needs a fresh comparison. A model label alone cannot establish fit to an aftermarket control.

Keep the rear brake order distinct

The rear shoe set contains two shoes, specified at 139 mm diameter and 40 mm width. That rear application does not make it a front shoe recommendation. Inspect the brake assembly and use the Honda service manual for replacement and adjustment requirements.

Ordering questions

Can I choose hydraulic master-cylinder parts for the original front brake?

The original Hawk I front brake is mechanical drum. If the motorcycle has a hydraulic conversion, identify its fitted components separately; the original-model brake application does not verify conversion parts.

Are both replacement levers the same finish?

No. The reviewed brake lever is black, and the reviewed clutch lever is silver. Check the individual finish as well as the mounting before choosing parts for a matched restoration.

Is the rear shoe package one shoe or a pair?

It contains two rear brake shoes. The specified dimensions are 139 mm diameter and 40 mm width; compare the rear assembly before ordering, especially if the wheel has been changed.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB400TIZ

Votre panier

×