VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB400TIIZ — Clignotants, supports, cabochons et réflecteurs

Keep a sound signal housing by repairing its support or lens seal. The 1979 Hawk II choices below include a measured chrome front stay, a two-piece rear rubber pack and a lamp gasket. Confirm the existing lamp pattern before buying replacements.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750 CB550 CB450 CB400 rear turn signal rubbers pk 2 33606-371-000

Honda CB750 / CB550 / CB450 / CB400 Rear Turn Signal Rubbers Pk/2 ~ Replaces 33606-371-000

$15.95 USD
73-0834
Replace your rear turn signal rubbers with this Rear Turn Signal Rubbers Pk/2, replacing OEM #33606-371-000. These are the rubbers that go under the...
Comparer

1979 Honda CB400TII Hawk II · Turn Signal Mounts & Gaskets Buying guide

Match the support and seal to the lamp

Front stay length, rear mounting rubber quantity and lens-gasket shape each affect the order. Compare the worn part at its own position, particularly when the motorcycle has non-original signal lamps.

Parts to consider

Honda CB Front Turn Signal Stay Chrome front signal stayThe stay has a 65 mm body and 25 mm threaded section, for 90 mm overall length. Compare all three dimensions with the fitted front support.Voir la pièce Honda CB750 / CB550 / CB450 / CB400 Rear Turn Signal Rubbers Pk/2 ~ Replaces 33606-371-000 Rear signal mounting rubbersPack of two rubbers for beneath the rear signal stay. Two rubbers are specified per rear signal, so one pack serves one signal mounting.Voir la pièce Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671 Signal lens gasketLens gasket replacing reference 33443-268-671. Match the original-style lamp and lens pattern before selecting it for an existing housing.Voir la pièce

Count packs by the rear signal position

The rear rubber package contains two pieces, and the application calls for two pieces at each rear signal. Replacing the rubbers at both rear signal mounts therefore requires two packs. Check the metal stays and their mounting surfaces while assessing the old rubbers.

Measure the stay before judging its appearance

Several chrome stays can look similar while placing the lamp differently. This front stay measures 90 mm overall, including its 25 mm threaded end. Compare the body length and attachment with the existing support, then check the gasket against the housing if the lens is being serviced.

Common buying questions

What quantity covers the left and right rear signal mounts?

Two packs. Each pack contains two rubbers, and two are required at each rear signal. One pack covers one signal mounting; order two when replacing the rubbers at both rear mounts.

Is 90 mm the chrome body length?

No, 90 mm is the overall stay length. The body is 65 mm and the threaded section is 25 mm. Measure those sections separately so the replacement places the signal where you expect.

Will the gasket fit a different aftermarket signal housing?

Compare the lens and housing pattern before ordering. The gasket follows reference 33443-268-671 and its matching original-style lamp arrangement; a different aftermarket housing may need a seal made for that lamp.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB400TIIZ

Votre panier

×