VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB400TIIZ — Contacteurs et capteurs

Choose a switch by the control or warning circuit it serves. The 1979 Hawk II front brake uses its year-specific stop-switch application, while the rear stop switch follows the pedal linkage. Compare the oil-pressure switch separately at the engine connection.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Contacteurs et capteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 rear brake light switch

Honda CB Rear Brake Light Switch

$10.33 USD
12-0008
Replace your rear brake light switch with this Rear Brake Light Stop Switch. Exceptionally broad fitment across the SOHC CB750 lineup and virtually the...
Honda CB900 CB750 CB650 CB550 CB500 oil pressure switch 37240-P13-013

Honda CB Oil Pressure Switch ~ Replaces 37240-P13-013

$23.95 USD
73-0825
Replace your oil pressure switch with this Oil Pressure Switch, replacing OEM #37240-P13-013.Key Features• Oil pressure switch• Replaces OEM #37240-P13-013• Honda part name: Switch...
Honda CB900 CB750 CB650 CB400 front brake light switch 35340-422-013

Honda CB900 / CB750 / CB650 / CB400 Front Brake Light Switch ~ Replaces 35340-422-013

$14.95 USD
12-0003
Fit the earlier DOHC CB's front brake light switch with this Front Brake Stop Switch, replacing OEM #35340-422-013. Fits the 1979-80 CB750 range, CB900C,...
Honda CB1100 CB1000 clutch lever brake light switch 35330-413-003

Honda CB Clutch Lever Brake Light Switch ~ Replaces 35330-413-003

$15.95 USD
29-7029
Replace your front clutch lever safety stop switch with this Clutch Lever Stop Switch, replacing OEM #35330-413-003. This is the switch that allows the...
Comparer

1979 Honda CB400TII Hawk II · Switches & Sensors Buying guide

Identify the switch at the failed circuit

The front stop switch, rear stop switch and oil-pressure switch have distinct mounting and electrical connections. Start with the component location, then compare the actual fitted control and wiring.

Parts to consider

Honda CB900 / CB750 / CB650 / CB400 Front Brake Light Switch ~ Replaces 35340-422-013 Front brake light switch1979 CB400TII application using reference 35340-422-013. Compare the plunger body and two flat terminals with the master cylinder fitted.Voir la pièce Honda CB Rear Brake Light Switch Rear brake light switchPedal-operated rear stop switch for the 1979 CB400TII. Compare the threaded adjuster, wiring ends and linkage with the existing rear switch.Voir la pièce Honda CB Oil Pressure Switch ~ Replaces 37240-P13-013 Oil-pressure warning switchReplacement oil-pressure switch using reference 37240-P13-013, with a 1979 CB400TII application. Check the terminal and fitted engine connection.Voir la pièce

Choose the front switch for the fitted control

The 1979 Type II front master cylinder has its own Honda addendum and stop-switch reference. Use the current control to check the switch, especially if the brake assembly has been replaced. Compare the plunger and electrical terminals before assuming a switch for another Hawk year will suit.

Check the fault before replacing the warning switch

A warning lamp that behaves incorrectly can have a wiring or connection fault as well as a failed switch. Inspect the terminal and follow the Honda diagnostic procedure before ordering. An oil-pressure warning that remains on needs its cause checked before further running, rather than being treated as a switch diagnosis.

Common buying questions

Does the 1979 front switch suit any Hawk master cylinder?

No blanket interchange is established. This switch replaces reference 35340-422-013 for the 1979 CB400TII application. If the master cylinder has been changed, identify its switch mounting and terminal arrangement before choosing a replacement.

What should I check if the rear brake light comes on too late?

Inspect the pedal linkage and switch adjustment before ordering a new switch. Honda provides a rear stoplight adjustment procedure. A damaged switch, broken linkage or incorrect adjustment should be distinguished before buying the replacement.

Should I buy an oil-pressure switch whenever the lamp stays on?

Have the cause checked first. A persistent warning can represent a pressure problem or an electrical fault. Compare the switch connection and use the correct diagnostic procedure; replacing the switch alone is not evidence that the warning is resolved.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB400TIIZ

Votre panier

×