VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB400TIIZ — Moteur

Begin an engine order with the job you are doing: routine oil service, a leaking cover or a measured cylinder rebuild. The 1979 Hawk II is a twin, so piston-kit quantities and component choices should follow its own engine layout.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Moteur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter washer set 15414-300-000

Honda CB Oil Filter Washer Set ~ Replaces 15414-300-000

$7.95 USD
15-0039
Fit oil filter washers with this Oil Filter Washer 5-pack, replacing OEM #15414-300-000. Used with original-type paper oil filter elements. Exceptionally broad fitment across...
Honda CB1100 CB1000 CB900 CB750 CB450 magnetic oil drain plug

Honda CB Magnetic Oil Drain Plug

$10.95 USD
15-0014
Catch steel debris on oil changes with this Magnetic Oil Drain Plug, 14mm diameter x M1.5, replacing OEM #92800-14000. Fits the CB750A Hondamatic, full...
Honda CB1100 CB1000 CB900 CB750 oil filter washer each 15414-300-000

Honda CB Oil Filter Washer ~ Each ~ Replaces 15414-300-000

$2.95 USD
15-0042
Oil filter washer designed to replace the original Honda component, matching OEM reference 15414-300-000. Used to create a proper seal at the oil filter...
Honda CB750 CB650 CB550 front sprocket lock plate set 23811-292-000

Honda CB Front Sprocket Lock Plate Set ~ Replaces 23811-292-000

$5.95 USD
49-0782
Replace your front sprocket lock plate with this Front Sprocket Lock Plate with 2 lock plate bolts. Always good to replace these when installing...
Nouveau
Épuisé
Honda CB1100 CB1000 CB900 CB750 drain plug washer

Honda CB1100/CB1000/CB900/CB750 Drain Plug Washer

$1.75 USD
15-0000
Replace your oil drain plug washer with this 14mm x 20mm x 1mm Drain Plug Washer. Broad fitment across the CB750A Hondamatic, the full...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB650 CB550 tappet adjuster screw and nut set 90012-426-000

Honda CB Tappet Adjuster Screw & Nut Set ~ Replaces 90012-426-000

$4.61 USD
49-0784
Replace your tappet adjuster screws and nuts with this Tappet Adjuster Screw & Nut Set. Each set includes one tappet adjuster screw and one...
Honda CB450 CB400 oil filter 15412-413-005

1978-86 Honda CB450 / CB400 Oil Filter ~ Replaces 15412-413-005

$8.95 USD
15-0007
Service your CB400 or CB450 with this Stock-Type Oil Filter Element (paper filter), replacing OEM #15412-413-005 / #154A1-413-005 / #154A1-MA6-000.Key Features• Stock-type paper oil...
Honda CB750 CB400 valve stem seal 12209-300-000

Honda CB750 / CB400 Valve Stem Seal

$3.50 USD
01-0131
Rebuild your CB750 top end the right way with this Valve Stem Seal, replacing OEM Ref. #12209-300-000 / #12209-300-003 / #12209-300-005 / #12209-300-010. Fits...
Nouveau
Honda CB400 CB450 exhaust valve 14721-413-000

Honda CB400 / CB450 Exhaust Valve ~ Replaces 14721-413-000

$19.95 USD
01-9962
Restore proper engine performance with this Exhaust Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Honda CB750 CB450 CB400 CB360 CB77 valve guide clip 12211-250-310

Honda CB Valve Guide Clip ~ Replaces 12211-250-310

$1.95 USD
73-0939
Replace your valve guide clip with this Valve Guide Clip, replacing OEM #12211-250-310.Sold each, order the quantity you require.Key Features• Valve guide clip• Replaces...
Nouveau
Honda CB400 CB450 intake valve 14711-235-010

Honda CB400 / CB450 Intake Valve ~ Replaces 14711-235-010

$19.95 USD
01-9961
Restore proper engine performance with this Intake Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Épuisé
Honda CB400 Athena overhaul gasket set

1978-81 Honda CB400 Athena Overhaul Gasket Set

$119.95 USD
18-0103
Rebuild your CB400 engine with this Athena Overhaul Engine Gasket Set. Athena of Italy is an original-equipment supplier to Yamaha, Honda, Kawasaki, Suzuki, and...
Épuisé
Honda CB450 CB400 valve cover gasket 12328-413-830

1978-86 Honda CB450 / CB400 Valve Cover Gasket ~ Replaces 12328-413-830

$31.95 USD
12-1014
Replace your CB400 or CB450 valve cover gasket with this Athena Brand Valve Cover Gasket, replacing OEM #12328-413-830. Fits the full CB400A/TI/TII/T range plus...
Honda CB400 cam chain tensioner 14500-413-000

Honda CB400 Cam Chain Tensioner ~ Replaces 14500-413-000

$34.95 USD
07-0193
Replace a worn cam chain tensioner on your CB400 with this Cam Chain Tensioner, replacing OEM #14500-413-000. Fits the CB400A, CB400TI, CB400TII, and CB400T,...
Honda CB400 CB450 silent cam chain a 412H x 110 14401-MR4-901

Honda CB400 / CB450 Silent Cam Chain A 412H x 110

$89.95 USD
01-0206
Keep your CB400 or CB450 running quiet and in spec with this Silent Cam Chain A, 412H x 110 links. High-quality construction made in...
Honda CB400TI std piston kit w rings and pin 13101-413-013

Piston Kit with Piston Rings and Pin ~ Standard Size (07-0187)

$69.95 USD
07-0187
Upgrade or rebuild your classic Honda motorcycle engine with this Standard Size Piston Kit — complete with piston, piston rings, and piston pin. This...
Nouveau
Honda CB450 CB400 CB360 CB350 drive chain adjuster with nut and bolt 40543-471-000

Honda CB Drive Chain Adjuster with Nut & Bolt ~ Replaces 40543-471-000 / 40543-312-010

$24.95 USD
99-4856
Upgrade or restore your classic Honda motorcycle’s rear drive system with this Drive Chain Adjuster with Nut and Bolt — a quality replacement designed...
Honda CB450 CB400 oil filter bolt 15420-413-000

1978-86 Honda CB450 / CB400 Oil Filter Bolt ~ Replaces 15420-413-000

$28.95 USD
15-3021
Fit the CB400 or CB450 oil filter bolt with this Oil Filter Bolt, replacing OEM #15420-413-000.Key Features• Oil filter bolt• Replaces OEM #15420-413-000• Honda...
Comparer

1979 Honda CB400TII Hawk II · Engine Parts Buying guide

Build the order around the work ahead

These choices cover everyday filtration, engine sealing and piston replacement. Establish which assemblies will be opened before buying, then use the narrower engine sections to match individual service parts.

Parts to consider

1978-86 Honda CB450 / CB400 Oil Filter ~ Replaces 15412-413-005 Stock-type oil filterPaper oil filter element for the original CB400TII housing; replaces reference 15412-413-005.Voir la pièce 1978-81 Honda CB400 Athena Overhaul Gasket Set Athena overhaul gasket setEngine overhaul gasket set with an explicit 1978–79 CB400TII application.Voir la pièce Piston Kit with Piston Rings and Pin ~ Standard Size (07-0187) Standard-size piston kitOne piston with rings, pin and clips. Two kits service both pistons in the Hawk II twin.Voir la pièce

Choose a sensible repair scope

A routine oil service starts with the paper element and inspection of the filter housing hardware. A cover leak needs its source identified before parts are ordered. The Athena overhaul set suits a broader teardown; match its contents to the engine joints you expect to open.

Order for a twin-cylinder engine

Each standard piston kit supplies one piston, rings, a pin and clips. Replacing both pistons therefore calls for two kits. Have the cylinders measured first: a standard-size label is a size choice, not evidence that worn or previously machined bores remain suitable.

Ordering questions

How many piston kits cover the complete engine?

Two kits cover the Hawk II’s two pistons. Each kit contains the parts for one piston; confirm that standard size is appropriate for both cylinders before placing the order.

Which filter is intended for the original housing?

The stock-type paper element replaces reference 15412-413-005. Compare the fitted housing if the motorcycle has been modified, and check its retaining hardware during service.

Should I buy the overhaul gasket set for a cover leak?

Identify the leaking joint first. A separate valve-cover gasket is a more focused choice when that is the only joint being opened; broader dismantling calls for a repair-specific gasket list.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB400TIIZ

Votre panier

×