VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB400TB — Soupapes et composants de distribution

Cylinder-head parts must be chosen by their position and function, not by their appearance alone. For the 1981 Hawk, the featured exhaust valve and individual guide clip support different stages of head work. Inspect the head before deciding which parts need renewal.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Soupapes et composants de distribution

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB400 CB450 exhaust valve 14721-413-000

Honda CB400 / CB450 Exhaust Valve ~ Replaces 14721-413-000

$19.95 USD
01-9962
Restore proper engine performance with this Exhaust Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Honda CB750 CB450 CB400 CB360 CB77 valve guide clip 12211-250-310

Honda CB Valve Guide Clip ~ Replaces 12211-250-310

$1.95 USD
73-0939
Replace your valve guide clip with this Valve Guide Clip, replacing OEM #12211-250-310.Sold each, order the quantity you require.Key Features• Valve guide clip• Replaces...
Nouveau
Honda CB400 CB450 intake valve 14711-235-010

Honda CB400 / CB450 Intake Valve ~ Replaces 14711-235-010

$19.95 USD
01-9961
Restore proper engine performance with this Intake Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Honda CB400 CB450 CB125 valve stem seal 12208-413-003

Honda CB400 / CB450 / CB125 Valve Stem Seal

$3.10 USD
01-0128
Stop top-end oil loss with this Valve Stem Seal, a replacement for OEM #12208-413-003 / #12209-KL4-005 / #12209-428-003. Fits a range of smaller-displacement Hondas,...
Comparer

1981 Honda CB400TB · Valvetrain Buying guide

Identify the valve position before ordering head parts

An exhaust valve closes a combustion-chamber port; a guide clip retains a valve guide. Keep those roles separate and base the replacement list on inspection of the valves, guides and seats.

Parts to consider

Honda CB400 / CB450 Exhaust Valve ~ Replaces 14721-413-000 Exhaust valveReplacement for exhaust-valve reference 14721-413-000 on the CB400T engine.Voir la pièce Honda CB Valve Guide Clip ~ Replaces 12211-250-310 Valve-guide clipGuide-retaining clip replacing reference 12211-250-310. Sold individually.Voir la pièce

Inspect the valve and its working surfaces

Replacing a valve is part of a cylinder-head repair, not a substitute for checking the seat and guide. Have the head assessed for wear and damage before buying parts. The featured valve is identified for the exhaust position and must not be substituted for an intake valve.

Keep small retaining parts on the order list

Guide clips are sold individually. Count the guides being serviced and inspect their retainers rather than ordering by the number of cylinders. Keep spring hardware and valve-stem seals on the same inspection checklist, using position-specific references for any additional parts required.

Buying questions

Is the featured valve an intake or exhaust replacement?

It is the exhaust valve, referencing 14721-413-000. Intake and exhaust parts serve different positions; compare the fitted valve and head reference rather than ordering by the general CB400 engine label.

Are the guide clips supplied as a complete head set?

No. The featured guide clip is sold each. Order the number required for the guides being serviced after the head has been inspected and the repair scope is known.

Should I order valves before the head is inspected?

Inspection first helps avoid an incomplete order. Valve condition, guide wear and seat condition affect the repair; a new valve alone may not address the cause of leakage or poor compression.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB400TB

Votre panier

×