Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1981 Honda CB400TB · Brakes & Clutch Buying guide
Front pads, rear shoes and clutch friction plates are separate service choices. The 1981 front brake matters here: use its specific caliper and master-cylinder application rather than assuming earlier Hawk brake parts carry over.
Kevlar front pads90 × 49 × 9 mm front pad set for the 1981 CB400T. One set services one caliper.Voir la pièce
Rear brake shoesSet of two rear shoes, listed at 139 mm diameter and 40 mm width.Voir la pièce
Main friction plateIndividual main friction plate; six are used in the CB400T clutch pack.Voir la pièce
Use the fitted caliper and master cylinder to confirm the order, especially on bikes with swapped front ends. The front pad set covers one caliper. Choose internal master-cylinder, reservoir or caliper repair parts according to the component being serviced rather than buying by the broad brake category.
The original clutch uses six main friction plates plus one different B-position friction plate. The corresponding steel plates also have separate A and B positions. Build a position-by-position order after checking wear, and use the Honda manual for stack arrangement and service limits.
Do not assume interchange. The 1981 model has the two-piston front-caliper arrangement covered here. Identify the fitted caliper, master cylinder and lever before choosing parts, particularly on a bike assembled from several years.
The featured set services one caliper, matching the original single-front-caliper arrangement. If the front end has been changed, confirm the caliper type and number before deciding on quantity.
No. The main friction plates are individual pieces, and the B-position friction plate is a different item. Count the required types separately; steel plates and springs are also separate ordering decisions.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.