VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB400TA — Soupapes et composants de distribution

The Hawk’s three-valve cylinder head needs position-specific parts. An exhaust valve and an intake valve-stem seal perform different jobs, and the intake and exhaust seal references differ. Identify the worn position before ordering replacements for this 1980 parallel twin.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Soupapes et composants de distribution

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB400 CB450 exhaust valve 14721-413-000

Honda CB400 / CB450 Exhaust Valve ~ Replaces 14721-413-000

$19.95 USD
01-9962
Restore proper engine performance with this Exhaust Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Honda CB750 CB450 CB400 CB360 CB77 valve guide clip 12211-250-310

Honda CB Valve Guide Clip ~ Replaces 12211-250-310

$1.95 USD
73-0939
Replace your valve guide clip with this Valve Guide Clip, replacing OEM #12211-250-310.Sold each, order the quantity you require.Key Features• Valve guide clip• Replaces...
Nouveau
Honda CB400 CB450 intake valve 14711-235-010

Honda CB400 / CB450 Intake Valve ~ Replaces 14711-235-010

$19.95 USD
01-9961
Restore proper engine performance with this Intake Valve, designed as a direct replacement for the original Honda component. This valve replaces OEM part number...
Honda CB400 CB450 CB125 valve stem seal 12208-413-003

Honda CB400 / CB450 / CB125 Valve Stem Seal

$3.10 USD
01-0128
Stop top-end oil loss with this Valve Stem Seal, a replacement for OEM #12208-413-003 / #12209-KL4-005 / #12209-428-003. Fits a range of smaller-displacement Hondas,...
Comparer

1980 Honda CB400TA Hawk · Valvetrain Buying guide

Match the valve position before counting parts

The factory head has four intake valves and two exhaust valves. The featured stem seal matches the intake reference; avoid treating six identical seals as a verified complete-head order.

Parts to consider

Honda CB400 / CB450 Exhaust Valve ~ Replaces 14721-413-000 Exhaust valveReplacement for Honda exhaust-valve reference 14721-413-000. Select by valve position rather than engine capacity alone.Voir la pièce Honda CB400 / CB450 / CB125 Valve Stem Seal Intake valve-stem sealSold individually. Its 12208-413-003 reference corresponds to the four intake-seal positions in the factory head.Voir la pièce

Pièces connexes : Individual valve-guide clip

Keep intake and exhaust seals separate

The featured individual seal references 12208-413-003, used at four intake positions. Honda identifies the two exhaust seals separately as 12209-413-003. Build a position-by-position order; an intake-seal reference alone does not establish a replacement for all six valves.

A replacement valve is only one head component

The exhaust valve references 14721-413-000. Check the valve and its matching guide and seat together before choosing parts. The related valve-guide clip is sold separately and does not include a guide. Follow the Honda manual for the inspection limits and service method.

Buying questions

How many of the featured stem seals are used in the head?

The original head uses four seals at the intake positions covered by reference 12208-413-003. The featured seal is sold individually; the two exhaust positions have a different factory reference.

How many exhaust valves are used across both cylinders?

The original head has two exhaust-valve positions, one for each cylinder, using reference 14721-413-000. Inspection determines whether one or both need replacement; keep that requirement separate from the four intake-valve positions.

How do I choose parts if the cylinder head has been replaced?

Identify the replacement head’s application and valve references before ordering. The original 1980 head uses different intake and exhaust seals; if the head’s history is unknown, have the valves and guides assessed rather than selecting by frame year alone.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB400TA

Votre panier

×