VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB400TA — Guidon et commandes

The handlebar choices for this 1980 Hawk focus on the rider’s contact surfaces and the upper clamps. Compare open- and closed-end replica grips, both 130mm long for 7/8-inch bars, then inspect the clamp mounting hardware before choosing the black replacement set.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1980 Honda CB400TA Hawk · Handlebar Grips & Clamps Buying guide

Plan the handgrips around the existing mounts

A grip change and a clamp replacement affect different parts of the cockpit. Confirm the bar diameter, throttle sleeve and mounting arrangement before selecting the pieces for your repair.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack factory-style rubber grips for 7/8-inch bars, 130mm long.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica grips130mm rubber grips for 7/8-inch bars, with end plugs included.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black handlebar clamp setUpper clamps for stock 7/8-inch bars. Mounting hardware is supplied separately.Voir la pièce

Choose how to finish the bar ends

Closed-end grips provide an enclosed end, while the open-end version includes separate end plugs. Both are black rubber replicas with the same stated length and bar application. When accessories occupy the bar ends, compare their attachment and clearance needs before deciding which grip version to order.

Check the clamps and their fasteners

The black clamp set replaces the original upper holder application, reference 95014-22200. It is intended for stock 7/8-inch bars, with mounting hardware supplied separately. Inspect the lower mounting arrangement and existing fasteners before treating an upper clamp replacement as the whole repair.

Questions before ordering

Are these genuine Honda grips?

They are factory-style replica rubber grips, offered against the original right and left grip references. Choose between closed ends or the open-end version with included plugs; neither should be described as a genuine Honda product.

Which grip style includes end plugs?

The open-end grip version includes separate plugs. The closed-end version uses enclosed rubber ends. Compare any bar-end accessory installation and the available 130mm grip space before choosing the version suited to your bars.

Does the handlebar clamp set include mounting bolts?

The mounting hardware is supplied separately. Check your existing fasteners and lower mounting arrangement when ordering the black upper clamps. Use the original 7/8-inch application only if the motorcycle still has the matching bar and mounts.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB400TA

Votre panier

×