VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB500K Four — Outils pour carburateur

The carburetor tool for the 1972 Honda CB500K is a preset measuring gauge intended for the stock carburetors. Check the fitted rack before choosing it. The stainless bracket available alongside it supports the rack with pods or no airbox rather than measuring float height.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB550F CB550K CB500K carb float setting tool

1971-77 Honda CB550F / CB550K / CB500K Carb Float Setting Tool

$15.94 USD
73-0888
Set your carb floats with ease using this Carb Float Setting Tool. Use this tool to help set your floats with ease. This pre-set...
Honda CB550K CB500K carburetor stabilizer bracket

1971-76 Honda CB550K / CB500K Carburetor Stabilizer Bracket

$49.95 USD
29-0540
Stabilize your CB500 or CB550 carburetors when running pods or hardtails with this Carburetor Stabilizer Bracket. High-quality stainless steel, made in Canada. A must-have...
Comparer

1972 Honda CB500K · Carburetor Tools Buying guide

Compare stock measuring needs with custom rack support

Float measurement and carburetor support are separate reasons to buy. The preset gauge is reusable on the stated carburetor application; the bracket is an accessory for the described altered intake arrangement.

Parts to consider

1971-77 Honda CB550F / CB550K / CB500K Carb Float Setting Tool CB500K preset float gaugeModel-specific measuring gauge for stock CB500K carburetors. It is supplied as one reusable tool and contains no replacement floats, float valves, gaskets or other fuel parts.Voir la pièce

Pièces connexes : Stainless carburetor rack support

Use the preset gauge only for its stated application

The gauge description identifies the stock CB500K carburetors rather than universal adjustment across different carburetor types. Check any replacement rack against its own specification. Confirm the correct float-height specification before using the preset gauge; similar-looking carburetors can have different requirements.

Decide whether rack support is part of the job

The bracket listing covers the CB500K with pods or without its airbox and describes support for the rack. It is not a carburetor rebuild kit or a substitute for sound sealing components. Consider it only for the stated support need, independently of fuel-level checks and repairs.

Preset Float Gauge & Rack Support questions

What if the original carburetors have been changed?

Identify the replacement carburetor type and its required float-height specification first. The listed preset is for the stock CB500K application, so the motorcycle’s year alone does not establish suitability for a different carburetor rack.

Does one stabilizer bracket support one carburetor or the complete rack?

One bracket supports the complete four-carburetor rack on one compatible motorcycle. It helps replace support lost with the stock airbox, so verify that the intended pod-filter or no-airbox arrangement needs that rack support.

What must be checked before accepting a preset-gauge reading?

Confirm the carburetor type and use the Honda-specified measuring angle. The float tang should contact the needle without compressing its spring-loaded tip. Check every carburetor; do not treat the model name alone as a float-height measurement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB500K Four

Votre panier

×