Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Leviers de frein et d’embrayage, câbles d’embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Clutch Cable Adjuster ~ 8 x 23mm

$3.58 USD
08-0067
Dial in your clutch cable with this Gold-Anodized Cable Adjuster, 8 x 23mm, for the clutch cable at the lever. Fits an exceptionally broad...

Honda CB Black Clutch Lever ~ Replaces 53178-461-000

$9.95 USD
08-0115
Replace your DOHC CB's black clutch lever with this Clutch Lever, a direct replacement for OEM #53178-461-000. Fits the 1979-82 DOHC CB750 lineup plus...

1979-83 Honda CB900 / CB750 Clutch Cable ~ Replaces 22870-425-010

$24.95 USD
51-2209
Replace your DOHC CB clutch cable with this Clutch Cable, replacing OEM #22870-425-010 / #22870-ME1-670.Key Features• Clutch cable• Replaces OEM #22870-425-010 / #22870-ME1-670• Honda...

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90113-422-000

$7.00 USD
73-0998
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt (8mm) & Nut Set, used to fasten the clutch lever in...
Épuisé
Honda CB750 CB900 CB1100 CB650 black hand lever 53175-MA5-671

Honda CB Black Hand Lever ~ Replaces 53175-MA5-671

$9.95 USD
08-0085
Choose a blacked-out alternative to the chrome 07-9995 brake lever with this Black Brake Lever. Replaces OEM #53175-MA5-671 / #53175-MA6-016 with the same broad...

Honda CB1000 / CB900 / CB750 / CB650 Handlebar Rubber Boot ~ Replaces 53180-425-010

$15.95 USD
73-0095
Replace your handlebar rubber boot with this Handlebar Rubber Boot, replacing OEM #53180-425-010.Key Features• Handlebar rubber boot• Replaces OEM #53180-425-010• Honda part name: Boot,...

Honda CB Clutch Lever Brake Light Switch ~ Replaces 35330-413-003

$15.95 USD
29-7029
Replace your front clutch lever safety stop switch with this Clutch Lever Stop Switch, replacing OEM #35330-413-003. This is the switch that allows the...
Épuisé
Honda CB1100 CB1000 handlebar brake lever pivot bolt and nut set 90114-MA5-671

Honda CB Handlebar Brake Lever Pivot Bolt & Nut Set ~ Replaces 90114-MA5-671

$9.95 USD
73-1031
Replace your brake lever pivot hardware with this Handlebar Brake Lever Pivot Bolt & Nut Set, used to fasten the brake lever in place....
Nouveau
Honda CB1000 CB900 CB750 CB650 clutch adjuster bolt 22841-425-000

Honda CB1000 / CB900 / CB750 / CB650 Clutch Adjuster Bolt ~ Replaces 22841-425-000

$8.35 USD
29-7033
Replace your clutch adjuster bolt with this Clutch Adjuster Bolt, replacing OEM #22841-425-000.Key Features• Clutch adjuster bolt• Replaces OEM #22841-425-000• Honda part name: Bolt,...

Honda CB Chrome Brake Lever ~ Replaces 53175-MA5-671

$18.95 USD
07-9995
Run a chrome brake lever on your later-model CB with this Chrome Brake Lever, a direct replacement for OEM #53175-MA5-671 / #53175-MA6-016. Fits a...

1982 Honda CB900C Custom · Levers & Clutch Cables Buying guide

Restore free movement at the lever and cable

Match the 1982 brake lever to its master-cylinder perch, and inspect the cable-operated clutch for stiffness, wear and poor routing. New levers will not remove play caused by a worn perch or pivot.

Match the lever to the installed control

The stock-type brake lever references for this year are 53175-MA5-671 or 53175-MA6-016; the clutch lever reference is 53178-461-000. Compare the pivot and contact features as well as appearance. Use the correct pivot hardware and verify the brake-light switch still operates.

Choose a cable after checking the route

The listed clutch cable references 22870-425-010 and 22870-ME1-670 for the 1980–82 Custom. Changed handlebars or routing can alter the required reach. Route without sharp bends or tension at full steering lock, then set free play using the Honda procedure.

Practical questions

Does a heavy clutch lever mean the clutch plates need replacement?

Start with the cable and release mechanism. Honda identifies a kinked, damaged or dirty cable and a damaged lifter mechanism as causes of excessive lever effort. Replacing plates alone may not help.

Will a new lever cure side-to-side movement at the pivot?

Inspect the pivot bolt, lever bore and perch together. Wear in the perch or incorrect hardware can leave movement even with a new lever.

What should I check after changing the clutch cable?

Confirm smooth movement and correct free play, then turn the bars fully each way to check for pulling or binding. Verify the clutch releases and re-engages correctly before riding.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×