VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB900C — Amortisseurs

Measure the rear shock mounting centres on your 1981 CB900C Custom before choosing a finish. The selected chrome-spring and black sets both specify 325mm eye-to-eye and four-position preload. Joint rubbers and replica mounting hardware support separate repairs when the existing shocks remain suitable.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Honda CB1100 CB1000 CB900 type shock absorber washer 90521-292-000

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB900C CB1000C CB650SC 325mm stock length shock absorber set

Honda CB Custom Stock Length Shock Absorber Set ~ Black / Chrome 325mm

$139.95 USD
06-3647
Fit stock-length 325mm rear shocks to your CB900C, CB1000C Custom, or late CB650SC Nighthawk with this Stock-Length Shock Absorber Set. Black body with chrome...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Nouveau
Épuisé
Honda CB1000C CB900C rear shock fork gaitor

1980-83 Honda CB1000C / CB900C Rear Shock Fork Gaitor ~ Genuine Honda OEM

$34.95 USD
99-5459
Upgrade or restore your classic Honda motorcycle with this Rear Shock Fork Gaitor — genuine Honda OEM quality made to the factory specifications. This...
Honda CB650 CB900 CB1000 black shock absorber set stock 325mm length

Black Shock Absorber Set ~ Stock 325mm Length

$139.95 USD
06-3600
Replace your shocks with this Shock Absorber Set, black body with black springs and black end cap. 325mm (12 3/4") eye to eye. 4-position...
Honda CB900C CB1000C CB650SC 325mm stock length shock absorber set

Honda CB Custom Stock Length Shock Absorber Set ~ Black / Chrome 325mm

$139.95 USD
06-3607
Match the shorter CB900C, CB1000C Custom, or late CB650SC rear geometry with this 325mm Stock-Length Shock Absorber Set. Black body with chrome progressive-wound heavy-duty...
Épuisé
Universal chrome 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Eye-to-Eye 290mm

$139.95 USD
06-3593
Pair a shortened chrome look with eye-to-eye mounting using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs, 290mm...
Comparer

1981 Honda CB900C Custom · Shock Sets & Mounting Parts Buying guide

Compare the original air system with the replacement shocks

Honda’s original 1981 CB900C rear shocks use upper and lower eyes and a linked air system. Both featured replacements are 325 mm eye-to-eye coil-spring pairs with four-position preload. Match the actual mounts and supplied bushes before fitting.

Parts to consider

Honda CB Custom Stock Length Shock Absorber Set ~ Black / Chrome 325mm 325mm chrome-spring shocksBlack bodies with chrome springs and end caps; four preload positions, with bushings, inserts, washers and preload wrench.Voir la pièce Black Shock Absorber Set ~ Stock 325mm Length 325mm all-black shocksBlack bodies, springs and end caps; 325mm eye-to-eye, with four-position preload adjustment.Voir la pièce Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000 Shock joint rubber pairTwo replacement joint rubbers; reference 52484-292-000.Voir la pièce

Pièces connexes : Replica shock nut · Replica shock washer

Check the complete replacement mounting package

The chrome-spring and all-black pairs list bushes, inserts, washers and a preload wrench. Their photographs show an eye at each end, consistent with the original mounting type. Check bush sizes and clearance against the motorcycle; the separate 52484-292-000 joint-rubber pair is not automatically a replacement for every bush supplied with an aftermarket set.

Assess lowering on the shaft-drive Custom

The 290 mm custom shock pairs in this category are shorter than the featured 325 mm sets. Sharing eye-type ends does not establish suitable ride height, travel or clearance. Have the shaft-drive suspension geometry, exhaust clearance and stand position assessed before choosing a different length; generic chain-angle advice does not apply to this motorcycle.

Buying questions

Can the original air-pressure instructions be used for these shocks?

No. The featured aftermarket sets specify four-position spring preload, while Honda’s original shocks are connected to an air system. Use the replacement maker’s installation and adjustment instructions and address the original air connections as that installation requires.

Does 325 mm prove that the shocks reproduce Honda’s original ride height?

It is the listed replacement eye-to-eye length. Confirm the fitted mounts, bush dimensions and intended application; overall length alone does not establish loaded ride height, spring rate or suspension travel. The product description is not a substitute for those installation checks.

Do the two joint rubbers replace every bush in a new shock pair?

The separate pair replaces reference 52484-292-000 at its matching mounts. The complete shock sets already list their own bushes and inserts. Compare the actual bush dimensions and instructions before adding separate rubber, nuts or washers.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB900C

Votre panier

×