VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1986 Honda CB700SC — Poignées

Grip selection for the 1986 CB700SC depends on the space and controls fitted to the bars. Both black rubber replicas are 130 mm long for a 7/8-inch handlebar application. Decide on open or closed ends after checking the throttle sleeve and existing bar-end fittings.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1986 Honda CB700SC · Black Rubber Grip Options Buying guide

Choose grip size before the end finish

Measure the available grip area and inspect the control beneath it. The choice between open ends with plugs and closed rubber ends should follow the fitted bar and throttle arrangement.

Parts to consider

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica gripsBlack rubber OEM-type grips for 7/8-inch handlebars, 130 mm long; end plugs included.Voir la pièce Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack rubber OEM-type grips for 7/8-inch handlebars, 130 mm long, with closed ends.Voir la pièce

Compare the end arrangements

The open-end grips include end plugs; the closed-end version provides a closed rubber finish. Choose around the bar ends and accessories already fitted. An opening in the grip does not itself establish that a bar-end mirror or weight will mount correctly with the supplied plugs.

Check the throttle during replacement

Inspect the sleeve, housing and surrounding clearance when renewing the grip. A worn or binding control needs its own repair rather than just new rubber. Follow the installation instructions and verify smooth throttle return after the completed grip and control work.

Buying questions

Will changing the end style cure a binding throttle?

It may change end clearance, but binding can also involve the sleeve, housing or cable routing. Inspect those separately and verify free throttle movement after fitting. Both listed grip styles are 130 mm long, so one does not solve a length mismatch by itself.

Do the supplied end plugs mount bar-end mirrors or weights?

The open-end grip listing includes end plugs, not an accessory mounting kit. Compare any mirror or weight’s own fittings and throttle clearance before using it with the open-ended grips.

Are these genuine Honda grips?

They are described as OEM-type replicas. The replacement references identify the intended application and style, while that manufacture distinction should remain clear when choosing them for a restoration.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1986 Honda CB700SC

Votre panier

×