VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB750K — Pistons et segments

Choose piston rings for your 1982 Honda CB750K from measured cylinder and piston sizes. This selection includes standard and oversize ring sets plus pin clips. Check the repair measurements first, then count the individual cylinders being serviced before ordering.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pistons et segments

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

Honda CB Piston Pin Clips 15mm Pk/2 ~ Replaces 94601-15000

$1.95 USD
05-7201
Secure your piston pins with this 2-pack of 15mm Piston Pin Clips, Japanese made to superior quality and replacing OEM Ref. #94601-15000. Exceptionally broad...
Épuisé
Honda CB750 standard piston ring set 13011-425-004

1979-83 Honda CB750 Piston Ring Set ~ Standard Size

$24.95 USD
05-7500
Rebuild your DOHC CB750's top end with this Standard Size Piston Ring Set, Japanese made to superior quality and replacing OEM Ref. #13011-425-004. Matched...
Honda CB750 DOHC 1ST oversize piston ring set +0.25mm 13021-425-004

1979-83 Honda CB750 DOHC Piston Ring Set ~ 1st Oversize +0.25mm

$24.95 USD
05-7501
Run a 0.25mm oversize on your DOHC CB750 with this 1st Oversize Piston Ring Set (+0.25mm), Japanese made to superior quality and replacing OEM...
Honda CB750 DOHC 2ND oversize piston ring set +0.50mm 13031-425-004

1979-83 Honda CB750 DOHC Piston Ring Set ~ 2nd Oversize +0.50mm

$24.95 USD
05-7502
Rebuild your DOHC CB750 at 0.50mm oversize with this 2nd Oversize Piston Ring Set (+0.50mm), Japanese made to superior quality and replacing OEM Ref....
Honda CB750K CB750C CB750F 62mm std piston kit w rings and pin 13101-425-000

Standard Size (62mm) Piston Kit (07-0184)

$69.95 USD
07-0184
Upgrade or rebuild your classic Honda motorcycle engine with this Standard Size (62mm) Piston Kit — complete with piston, piston rings, piston pin, and...
Comparer

1982 Honda CB750K · Piston Rings & Pin Clips Buying guide

Select ring size from the engine measurements

The three ring listings serve different bore sizes, and each set covers one piston. Pin clips are separate hardware. Treat size and package quantity as two independent checks when preparing the order.

Parts to consider

1979-83 Honda CB750 Piston Ring Set ~ Standard Size Standard-size piston ringsOne piston per set; standard size must match the measured cylinder and piston.Voir la pièce 1979-83 Honda CB750 DOHC Piston Ring Set ~ 1st Oversize +0.25mm First-oversize piston ringsA +0.25mm ring set for one suitably sized piston.Voir la pièce 1979-83 Honda CB750 DOHC Piston Ring Set ~ 2nd Oversize +0.50mm Second-oversize piston ringsA +0.50mm ring set for one piston, selected after measuring the engine.Voir la pièce

Pièces connexes : Piston pin clips

Standard and oversize are different choices

Standard, +0.25mm and +0.50mm ring sets are listed separately. Choose the size that matches the measured engine and intended machining work. An oversize label is not a cure for an unmeasured worn cylinder; establish the rebuild dimensions before placing the order.

Count the piston positions

Each featured ring set supplies one piston. Four matching sets are needed when servicing all four pistons at the same bore size. The two-pack of 15mm pin clips is a separate listing, so check clip requirements and any piston-package contents independently.

Common questions

Does one ring set cover the entire engine?

No. Each featured listing states that its ring set covers one piston. A four-piston rebuild at a single matching size requires four sets, subject to the measurements for that engine.

Which oversize should I choose?

Use the measured cylinder diameter, piston specification and machining plan. The +0.25mm and +0.50mm options are distinct sizes; neither can be selected reliably from the motorcycle year alone.

Are pin clips included with these ring sets?

The ring listings describe piston rings, while pin clips have a separate two-piece listing. Review the actual contents of any piston kit already being used before adding more clips.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB750K

Votre panier

×