VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB200T — Freins et embrayage

Plan a 1975 CB200T brake or clutch order around the assembly being repaired. This selection includes rear brake-rod hardware, clutch levers and separate clutch plates. Inspect any changed controls or brake equipment before choosing parts from the wider category.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB500 clutch tab washer 90431-292-000

Honda CB Clutch Tab Washer ~ Replaces 90431-292-000

$7.50 USD
73-0839
Replace your clutch tab washer with this Clutch Washer, 16mm size, replacing OEM #90431-292-000.Key Features• Clutch tab washer• 16mm size• Replaces OEM #90431-292-000• Honda...
Honda CB750 CB550 CB450 CB400F clutch lever 53178-369-700

Honda CB Clutch Lever ~ Replaces 53178-369-700

$9.95 USD
08-0006
Replace a worn silver-with-black-tip clutch lever with this Clutch Lever, a direct replacement for OEM #53178-369-700. Exceptionally broad fitment across the classic Honda lineup,...
Honda CB750 CB550 handlebar clutch lever pivot bolt and nut set 90114-310-000

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000

$6.95 USD
73-0996
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt & Nut Set, used to fasten the clutch lever in place....
Honda CB750 CB400 CB200 clutch lever return spring 22815-300-000

Honda CB750 / CB400 / CB200 Clutch Lever Return Spring ~ Replaces 22815-300-000

$5.95 USD
29-7010
Replace your clutch lever return spring with this Clutch Lever Return Spring, located behind the clutch cover. Replaces OEM #22815-300-000.Key Features• Clutch lever return...
Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Épuisé
Honda CB750 CB550 CB450 gp-style clutch lever 53178-369-700

Honda CB GP-Style Clutch Lever ~ Replaces 53178-369-700

$9.95 USD
08-0080
Bring racetrack-inspired ergonomics to your cockpit with this Custom GP-Style Clutch Lever in silver. Features a more pronounced bend/kickback than the stock lever, for...
Honda CB750 CB700 CB650 CB550 CB500 brake rod joint pin w cotter pin

Honda CB Brake Rod Joint Pin with Cotter Pin

$5.95 USD
73-0844
Replace your brake rod joint pin with this Brake Rod Joint Pin with Cotter Pin, replacing OEM #95015-52000 (joint pin) and #94201-16250 (cotter pin).Key...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Universal Honda-type front master cylinder assembly 13mm

Universal Honda-Type Front Master Cylinder Assembly ~ 13mm

$84.95 USD
08-0262
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Épuisé
Honda CB750 CB650 CB550 replacement brake lever for master cylinder

Honda CB Replacement Brake Lever for Master Cylinder 08-0262

$9.95 USD
08-0430
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Nouveau
Honda CB450 CB400 CB350 CB200 steel clutch plate b 22321-333-010

Honda CB450 / CB400 / CB350 / CB200 Steel Clutch Plate B ~ Replaces 22321-333-010

$9.50 USD
39-1326
Replace your CB400, CB450, CB350F/CB400F, or CB200 steel clutch plate B with this Steel Clutch Plate B, replacing OEM #22321-333-010.1 piece used per bike.Key...
Honda CB400 CB350 CB200 CB175 CB92 steel clutch plate 23311-200-000

Honda CB Steel Clutch Plate ~ Replaces 23311-200-000

$10.95 USD
39-1242
Replace your CB350F, CB400F, or small-CB steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #23311-200-000 / #22311-200-000.Order the number of pieces...
Honda CB400 CB200 CB175 clutch friction plate 22201-302-010

Honda CB400 / CB200 / CB175 Clutch Friction Plate ~ Replaces 22201-302-010

$9.95 USD
39-1055
Replace your CB400F or small-CB clutch friction disc with this Clutch Friction Plate / Disc, replacing OEM #22201-302-010 / #22202-ML4-610 / #22202-ML4-611.Order the number...
Magura universal front master cylinder assembly 13mm

Magura Universal Front Master Cylinder Assembly ~ 13mm

$259.00 USD
08-0250
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Comparer

1975 Honda CB200T · Brake & Clutch Buying guide

Choose parts for the fitted brake and clutch controls

Rear brake linkage, handlebar clutch controls and internal clutch plates need different checks. Identify the fitted equipment before treating a broadly listed or universal brake component as a model-specific replacement.

Parts to consider

Honda CB Clutch Lever ~ Replaces 53178-369-700 Silver clutch lever with black tipStock-style silver clutch lever with a black rubber tip, replacing reference 53178-369-700.Voir la pièce Honda CB Brake Rod Adjusting Nut Brake rod adjusting nutReplacement adjusting nut for the brake rod, with reference 95015-42000 and a stated 1975–76 CB200T application.Voir la pièce

Pièces connexes : Rear brake rod joint · Clutch lever pivot bolt and nut · Clutch friction disc

Start at the control being repaired

A worn handlebar pivot calls for a different order from a rear brake-rod adjuster. The linked clutch pivot set contains one bolt and one nut. Compare those pieces with the fitted perch, and assess the lever and perch before treating new hardware as the whole repair.

Treat clutch plates as separate choices

The listed CB200T application calls for one B-type steel plate and five friction discs. These are separate component choices, not a packaged clutch set. Check the fitted assembly and the condition of the remaining plates before preparing a complete repair order.

Buying questions

Can I choose a universal master cylinder by the model tag?

No. The universal hydraulic units require a compatible brake system, and their descriptions do not establish a stock CB200T replacement. Identify the fitted controls, caliper and connections before considering one for a modified motorcycle.

Does the pivot hardware come with a new clutch lever?

The pivot bolt and nut are offered as a separate linked set containing one of each. The lever description does not establish that set as included, so inspect your existing hardware when deciding what to order.

How many friction discs does the CB200T application specify?

The linked friction-disc application specifies five per 1975–76 CB200T, with pieces ordered in the required quantity. The B-type steel plate is separately listed at one per bike; those counts do not describe a boxed repair kit.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB200T

Votre panier

×